Development of Heavy-Weight Hematite-Based Geopolymers for Oil and Gas Well Cementing
ACS Omega · 18.04.2023 · 8 (15) · 14025-14033
DOI: 10.1021/acsomega.3c00590 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 04.04.2023. Verfasst von Ahmed Abdelaal und 2 weiteren Autor:innen. Beteiligte Einrichtung: College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, Dhahran, Eastern Province 31261, Saudi Arabia. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
In the petroleum industry, ordinary Portland cement (OPC) is utilized for different cementing applications. Yet, there are some technical and environmental issues for the usage of OPC in well cementing. The technical problems include gas invasion while setting, instability at corrosive environments, cement failure while perforation and fracturing due to high stiffness and brittleness, and strength reduction and thermal instability at elevated temperatures. Moreover, OPC production consumes massive energy and generates high greenhouse gas emissions. This study introduced the first hematite-based class F fly ash geopolymer formulation that can be used in oil and gas well cementing. Different properties of the designed slurry and hardened samples such as rheology, thickening time, strength, and elastic and petrophysical properties were evaluated. Moreover, mixability and pumpability challenges of heavy-weight geopolymer slurries were investigated. Unlike most of the studies in the literature, this work used 4 M NaOH solution only as an activator that can reduce the overall cost. The results showed that increasing the hematite percentage significantly decreased the thickening time. The developed formulation fell within the recommended fluid loss ranges for some cementing applications without using a fluid loss control additive. A proposed mixture of retarder and superplasticizer was introduced to enhance the thickening time by almost 5 times. The compressive strength increased by 49% and the tensile strength was enhanced by 27.4% by increasing the curing time from 1 to 7 days. The improvement in both compressive and tensile strength with curing time indicated that the geopolymerization reaction continued for extended time but with a smaller rate. The developed slurry acted more like a power law fluid at low temperatures and more like a Bingham plastic fluid at high temperatures. The elastic properties of the developed geopolymer samples proved that they are more flexible than some cement systems.
Autor:innen und Institutionen
- College of Petroleum Engineering and Geosciences, King Fahd University of Petroleum & Minerals, Dhahran, Eastern Province 31261, Saudi Arabia.
- Department of Architecture, King Fahd University of Petroleum & Minerals, Dhahran, Eastern Province 31261, Saudi Arabia.
ORCID-Profile: Salaheldin Elkatatny, Ahmed Mohsen Abd El Fattah
Zitieren
APA
Abdelaal, A., Elkatatny, S., & Abd El Fattah, A. M. (2023). Development of Heavy-Weight Hematite-Based Geopolymers for Oil and Gas Well Cementing. ACS Omega, 8(15), 14025-14033. https://doi.org/10.1021/acsomega.3c00590
Vancouver
Abdelaal A, Elkatatny S, Abd El Fattah AM. Development of Heavy-Weight Hematite-Based Geopolymers for Oil and Gas Well Cementing. ACS Omega. 2023;8(15):14025-14033. doi:10.1021/acsomega.3c00590
BibTeX
@article{Abdelaal2023,
author = {Abdelaal, Ahmed and Elkatatny, Salaheldin and Abd El Fattah, Ahmed Mohsen},
title = {Development of Heavy-Weight Hematite-Based Geopolymers for Oil and Gas Well Cementing},
journal = {ACS Omega},
year = {2023},
volume = {8},
number = {15},
pages = {14025--14033},
doi = {10.1021/acsomega.3c00590}
}
EUVIMED