A Review on the Adsorption Isotherms and Design Calculations for the Optimization of Adsorbent Mass and Contact Time
ACS Omega · 23.05.2023 · 8 (20) · 17407-17430
DOI: 10.1021/acsomega.2c08155 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift ACS Omega, online erschienen am 24.04.2023. Verfasst von Orla P Murphy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Sciences, Synthesis and Solid State Pharmaceutical Research Centre and Bernal Research Institute, University of Limerick, Lime…. Die Arbeit wurde bisher 379-mal zitiert (Crossref) und nennt 99 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Enterprise Ireland, European Commission, Science Foundation Ireland.
Abstract (Originalsprache)
Adsorption is a widely used chemical engineering unit operation for the separation and purification of fluid streams. Typical uses of adsorption include the removal of targeted pollutants like antibiotics, dyes, heavy metals, and other small to large molecules from aqueous solutions or wastewater. To date several adsorbents that vary in terms of their physicochemical properties and costs have been tested for their efficacy to remove these pollutants from wastewater. Irrespective of the type of adsorbent, nature of the pollutant, or experimental conditions, the overall cost of adsorption depends directly on the adsorption contact time and the cost of the adsorbent materials. Thus, it is essential to minimize the amount of adsorbent and the contact time required. We carefully reviewed the attempts made by several researchers to minimize these two parameters using theoretical adsorption kinetics and isotherms. We also clearly explained the theoretical methods and the calculation procedures involved during the optimization of the adsorbent mass and the contact time. To complement the theoretical calculation procedures, we also made a detailed review on the theoretical adsorption isotherms that are commonly used to model experimental equilibrium data that can be used to optimize the adsorbent mass.
Autor:innen und Institutionen
- Department of Chemical Sciences, Synthesis and Solid State Pharmaceutical Research Centre and Bernal Research Institute, University of Limerick, Limerick, Ireland V94 T9PX.
- Department of Chemical and Process Engineering, Faculty of Engineering and Physical Sciences, School of Chemistry and Chemical Engineering, University of Surrey, Guildford, United Kingdom GU2 7XH.
ORCID-Profile: Orla P Murphy, K Vasanth Kumar
Förderung
- Enterprise Ireland
- European Commission
- Science Foundation Ireland
Zitieren
APA
Murphy, O. P., Vashishtha, M., Palanisamy, P., & Kumar, K. V. (2023). A Review on the Adsorption Isotherms and Design Calculations for the Optimization of Adsorbent Mass and Contact Time. ACS Omega, 8(20), 17407-17430. https://doi.org/10.1021/acsomega.2c08155
Vancouver
Murphy OP, Vashishtha M, Palanisamy P, Kumar KV. A Review on the Adsorption Isotherms and Design Calculations for the Optimization of Adsorbent Mass and Contact Time. ACS Omega. 2023;8(20):17407-17430. doi:10.1021/acsomega.2c08155
BibTeX
@article{Murphy2023,
author = {Murphy, Orla P and Vashishtha, Mayank and Palanisamy, Parimaladevi and Kumar, K Vasanth},
title = {A Review on the Adsorption Isotherms and Design Calculations for the Optimization of Adsorbent Mass and Contact Time},
journal = {ACS Omega},
year = {2023},
volume = {8},
number = {20},
pages = {17407--17430},
doi = {10.1021/acsomega.2c08155}
}
EUVIMED