Reduced Graphene Oxide-Modified Spinel Cobalt Ferrite Nanocomposite: Synthesis, Characterization, and Its Superior Adsorption Performance for Dyes and Heavy Metals
ACS Omega · 21.02.2023 · 8 (7) · 6376-6390
DOI: 10.1021/acsomega.2c06636 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Omega, online erschienen am 13.02.2023. Verfasst von Zafar Iqbal und 2 weiteren Autor:innen. Beteiligte Einrichtung: Environmental Science Research Lab, Department of Applied Sciences & Humanities, Faculty of Engineering & Technology, Jamia Millia Islamia, New Delhi…. Die Arbeit wurde bisher 93-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Council of Scientific and Industrial Research.
Abstract (Originalsprache)
This work is dedicated to the synthesis, characterization, and adsorption performance of reduced graphene oxide-modified spinel cobalt ferrite nanoparticles. The as-synthesized reduced graphene oxide cobalt ferrite (RGCF) nanocomposite has been characterized using FTIR spectroscopy, FESEM coupled with EDXS, XRD, HRTEM, zeta potential, and vibrating sample magnetometer (VSM) measurements. FESEM proves the particle size in the range of 10 nm. FESEM, EDX, TEM, FTIR, and XPS analyses provide the proof of successful incorporation of rGO sheets with cobalt ferrite nanoparticles. The crystallinity and spinel phase of cobalt ferrite nanoparticles have been shown by XRD results. The saturation magnetization (M s) was measured as 23.62 emu/g, proving the superparamagnetic behavior of RGCF. The adsorption abilities of the synthesized nanocomposite have been tested using cationic crystal violet (CV) and brilliant green (BG) and anionic methyl orange (MO) and Congo red (CR) dyes. The adsorption trend for MO, CR, BG, and As(V) follows RGCF > rGO > CF at neutral pH. Adsorption studies have been accomplished by optimizing parameters like pH (2-8), adsorbent dose (1-3 mg/25 mL), initial concentration (10-200 mg/L), and contact time at constant room temperature (RT). To further investigate the sorption behavior, isotherm, kinetics, and thermodynamic studies have been conducted. Langmuir isotherm and pseudo-second-order kinetic models suited better for the adsorption of dyes and heavy metals. The maximum adsorption capacities (q m) obtained have been found as 1666.7, 1000, 416.6, and 222.2 mg/g for MO, CR, BG, and As, respectively, with operational parameters such as T = 298.15 K; RGCF dose: 1 mg for MO and 1.5 mg each for CR, BG, and As. Thus, the RGCF nanocomposite was found to be an excellent adsorbent for the removal of dyes and heavy metals.
Autor:innen und Institutionen
- Environmental Science Research Lab, Department of Applied Sciences & Humanities, Faculty of Engineering & Technology, Jamia Millia Islamia, New Delhi 110025, India.
ORCID-Profile: Zafar Iqbal, Mohd Saquib Tanweer
Förderung
- Council of Scientific and Industrial Research
Zitieren
APA
Iqbal, Z., Tanweer, M. S., & Alam, M. (2023). Reduced Graphene Oxide-Modified Spinel Cobalt Ferrite Nanocomposite: Synthesis, Characterization, and Its Superior Adsorption Performance for Dyes and Heavy Metals. ACS Omega, 8(7), 6376-6390. https://doi.org/10.1021/acsomega.2c06636
Vancouver
Iqbal Z, Tanweer MS, Alam M. Reduced Graphene Oxide-Modified Spinel Cobalt Ferrite Nanocomposite: Synthesis, Characterization, and Its Superior Adsorption Performance for Dyes and Heavy Metals. ACS Omega. 2023;8(7):6376-6390. doi:10.1021/acsomega.2c06636
BibTeX
@article{Iqbal2023,
author = {Iqbal, Zafar and Tanweer, Mohd Saquib and Alam, Masood},
title = {Reduced Graphene Oxide-Modified Spinel Cobalt Ferrite Nanocomposite: Synthesis, Characterization, and Its Superior Adsorption Performance for Dyes and Heavy Metals},
journal = {ACS Omega},
year = {2023},
volume = {8},
number = {7},
pages = {6376--6390},
doi = {10.1021/acsomega.2c06636}
}
EUVIMED