EUVIMEDEUVIMED entdecken
Crossref

Polymer-Derived Tantalum Carbide Ceramic Aerogel Monoliths for Ultrahigh-Temperature Thermal Insulation up to 2000 °C

Yifan Li, Yixin Zhang, Boxuan Feng, Ruotong Liu, Anran Guo iD, Feng Hou iD, Jiachen Liu, Liwen Yan iD

ACS Nano · 10.11.2026 · 20 (44) · 30246-30256

DOI: 10.1021/acsnano.6c15479 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 27.10.2026. Verfasst von Yifan Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Ceramics and Machining Technology (Ministry of Education), School of Materials Science and Engineering, Tianjin University…. Die Arbeit nennt 65 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ceramic aerogels are ideal thermal insulating materials in the aerospace field because of their low density and low thermal conductivity but are plagued by the limited operating temperature due to the inherently poor high-temperature resistance. In this work, the tantalum carbide (TaC) ceramic aerogel monolith with outstanding ultrahigh temperature stability was successfully prepared through the polymer precursor conversion method combined with the sol–gel technique. Benefiting from the pyrolysis process of the polymer precursor aerogel, the TaC aerogel monoliths with the pearl necklace-like structure were obtained at a low temperature of 1500 °C. The as-prepared TaC aerogels exhibit a low density (0.46–0.63 g/cm3), high Brunauer–Emmett–Teller (BET) specific surface area (95.15–148.17 m2/g), low thermal conductivity (0.046–0.058 W·m–1·K–1), and a good compressive strength (0.043–0.297 MPa). Most importantly, after heat treatment up to 2000 °C under vacuum, the pearl necklace-like structure of the TaC aerogel is well preserved, and the thermal conductivity remains at a low level of 0.059 W·m–1·K–1, indicating the excellent ultrahigh-temperature stability of TaC aerogels. The excellent thermal insulating performance and ultrahigh-temperature stability make the TaC aerogel an attractive material for thermal insulation in extreme conditions.

Schlagwörter

Stichwörter der Autor:innen

aerogelspolymer-derived ceramicsthermal insulationultrahigh-temperature stabilityultrahigh-temperature ceramics

Autor:innen und Institutionen

  • Key Laboratory of Advanced Ceramics and Machining Technology (Ministry of Education), School of Materials Science and Engineering, Tianjin University, Tianjin300072, P. R. China.

ORCID-Profile: Anran Guo, Feng Hou, Liwen Yan

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Li, Y., Zhang, Y., Feng, B., Liu, R., Guo, A., Hou, F., Liu, J., & Yan, L. (2026). Polymer-Derived Tantalum Carbide Ceramic Aerogel Monoliths for Ultrahigh-Temperature Thermal Insulation up to 2000 °C. ACS Nano, 20(44), 30246-30256. https://doi.org/10.1021/acsnano.6c15479

Vancouver

Li Y, Zhang Y, Feng B, Liu R, Guo A, Hou F, et al. Polymer-Derived Tantalum Carbide Ceramic Aerogel Monoliths for Ultrahigh-Temperature Thermal Insulation up to 2000 °C. ACS Nano. 2026;20(44):30246-30256. doi:10.1021/acsnano.6c15479

BibTeX
@article{Li2026,
  author = {Li, Yifan and Zhang, Yixin and Feng, Boxuan and Liu, Ruotong and Guo, Anran and Hou, Feng and Liu, Jiachen and Yan, Liwen},
  title = {Polymer-Derived Tantalum Carbide Ceramic Aerogel Monoliths for Ultrahigh-Temperature Thermal Insulation up to 2000 °C},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {44},
  pages = {30246--30256},
  doi = {10.1021/acsnano.6c15479}
}
Kostenlos starten →