EUVIMEDEUVIMED entdecken
Crossref

Riveting Rubidium in Alkali-Metal Layers: High-Performance P2-Type Layered Oxide Cathodes for Potassium-Ion Batteries

Liping Duan, Yichen Du, Qixiang Huang, Zeyu Yuan iD, Zicheng Wu, Chi Zhou, Yumiao Ruan, Xiaosi Zhou iD

ACS Nano · 03.11.2026 · 20 (43) · 29177-29187

DOI: 10.1021/acsnano.6c15431 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 22.10.2026. Verfasst von Liping Duan und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Microbial Technology School of Chemistry and Materials Science, Nanjing Normal University, Nanjing210023, China. Die Arbeit nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Graduate Research and Innovation Projects of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered manganese-based oxides for potassium-ion batteries (PIBs) suffer from severe structural degradation, primarily due to irreversible phase transitions, Jahn–Teller distortion, and sluggish K+ diffusion kinetics. Here, we propose an alkali-metal site riveting strategy by selectively incorporating oversized Rb+ ions into the prismatic sites of P2-type K0.55Mn0.8Ni0.1T0.1O2. The introduced Rb+ acts as a rigid pillar, expanding the interlayer spacing and reinforcing adjacent transition-metal–oxygen (TM–O) bonds. This synergistic modulation not only widens the two-dimensional diffusion channels for rapid K+ transport but also effectively suppresses the detrimental P2–P′2 phase transition and mitigates Jahn–Teller distortion of Mn3+. Consequently, the optimized K0.55Rb0.025Mn0.8Ni0.1Ti0.1O2 cathode delivers a high reversible capacity of 105.3 mAh g–1 at a current density of 20 mA g–1, outstanding rate capability (56.1 mAh g–1 at 500 mA g–1), and long-term cycling stability with 82.1% capacity retention after 500 cycles. Furthermore, a pouch cell paired with a soft carbon anode achieves 81.3% capacity retention over 300 cycles. This work demonstrates that anchoring oversized cations in alkali-metal layers provides a universal and effective strategy toward near-zero-strain layered oxide cathodes for advanced PIBs.

Schlagwörter

Stichwörter der Autor:innen

Rb rivetingalkali-metal site engineeringlayered oxide cathodenear-zero-strainpotassium-ion battery

Autor:innen und Institutionen

  • State Key Laboratory of Microbial Technology School of Chemistry and Materials Science, Nanjing Normal University, Nanjing210023, China.

ORCID-Profile: Zeyu Yuan, Xiaosi Zhou

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Jiangsu Province
  • Graduate Research and Innovation Projects of Jiangsu Province

Zitieren

APA

Duan, L., Du, Y., Huang, Q., Yuan, Z., Wu, Z., Zhou, C., Ruan, Y., & Zhou, X. (2026). Riveting Rubidium in Alkali-Metal Layers: High-Performance P2-Type Layered Oxide Cathodes for Potassium-Ion Batteries. ACS Nano, 20(43), 29177-29187. https://doi.org/10.1021/acsnano.6c15431

Vancouver

Duan L, Du Y, Huang Q, Yuan Z, Wu Z, Zhou C, et al. Riveting Rubidium in Alkali-Metal Layers: High-Performance P2-Type Layered Oxide Cathodes for Potassium-Ion Batteries. ACS Nano. 2026;20(43):29177-29187. doi:10.1021/acsnano.6c15431

BibTeX
@article{Duan2026,
  author = {Duan, Liping and Du, Yichen and Huang, Qixiang and Yuan, Zeyu and Wu, Zicheng and Zhou, Chi and Ruan, Yumiao and Zhou, Xiaosi},
  title = {Riveting Rubidium in Alkali-Metal Layers: High-Performance P2-Type Layered Oxide Cathodes for Potassium-Ion Batteries},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {43},
  pages = {29177--29187},
  doi = {10.1021/acsnano.6c15431}
}
Kostenlos starten →