Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries
ACS Nano · 19.11.2026
DOI: 10.1021/acsnano.6c14733 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Nano, online erschienen am 19.11.2026. Verfasst von Chunwei Li und 10 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Science and Technology on Electromechanical Dynamic Control Laboratory, Scientists Engineer Team Construction Project of Xi’an Science and Technology Program.
Abstract (Originalsprache)
The pursuit of higher energy and power densities in sodium-ion batteries (SIBs) is constrained by the trade-off between multielectron faradaic reaction kinetics and interfacial stability. Here, we develop a catalyst-mediated presodiation and interfacial rejuvenation strategy to address the low initial Coulombic efficiency of hard carbon (HC) anodes and transition-metal (TM) dissolution from high-voltage polyanionic and layered oxide cathodes in ampere-hour-scale pouch cells. Moving beyond empirical catalyst selection, we establish a rational screening framework for transition-metal single-atom sites based on electronic coupling and geometric compatibility with Na2S. Atomically dispersed Co (SA-Co) emerges as the preferred catalyst, reducing the Na2S decomposition potential to 3.49 V. An SA-Co/Na2S@C functional layer enables precise sodium-inventory compensation and simultaneous interfacial rejuvenation. Unlike conventional blended additives, sulfur-derived polysulfides suppress TM crossover and support high-voltage operation up to 4.5 V, while replenished sodium compensates irreversible HC losses and stabilizes the solid-electrolyte interphase. Coupling an SA-Co/Na2S@C-coated Na3V2(PO4)3 (NVP) cathode (18 mg cm–2) with an HC anode under lean-sodium and lean-electrolyte conditions (N/P ratio = 0.4; E/C ratio = 1.2 g Ah1–) yields a 1.1 Ah pouch cell retaining 97.2% capacity after 200 cycles, with gravimetric and volumetric energy densities of 317 Wh kg–1 and 485 Wh L–1, respectively, and a maximum power density of 831 W kg–1. Compatible with existing electrode manufacturing, this scalable interfacial approach offers a practical pathway toward high-energy, high-power SIBs.
Förderung
- National Natural Science Foundation of China
- Science and Technology on Electromechanical Dynamic Control Laboratory
- Scientists Engineer Team Construction Project of Xi’an Science and Technology Program
- Key Research and Development Project of Shaanxi Science and Technology Program
- Science and Technology Innovation Talent Enterprise Service Project of Xi’an Science and Technology Program
Zitieren
APA
Li, C., Zhao, P., Shao, A., Wang, T., Tang, J., Tan, W., Liu, J., Hu, Y., Fan, P., Zhang, J., & Ma, Y. (2026). Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries. ACS Nano. https://doi.org/10.1021/acsnano.6c14733
Vancouver
Li C, Zhao P, Shao A, Wang T, Tang J, Tan W, et al. Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries. ACS Nano. 2026. doi:10.1021/acsnano.6c14733
BibTeX
@article{Li2026,
author = {Li, Chunwei and Zhao, Peiyu and Shao, Ahu and Wang, Tongshuai and Tang, Jiawen and Tan, Wenzhuo and Liu, Jiacheng and Hu, Yisheng and Fan, Peiwen and Zhang, Junyu and Ma, Yue},
title = {Screening of Single-Atom Catalysts for Na2S-Mediated Pre-Sodiation and Interfacial Rejuvenation in Low N/P Ratio Sodium Batteries},
journal = {ACS Nano},
year = {2026},
doi = {10.1021/acsnano.6c14733}
}
EUVIMED