EUVIMEDEUVIMED entdecken
Crossref

Wafer-Scale p-type TeSeO x for Complementary Oxide Electronics

Ting Liu iD, Fan Yang, Ziyi Liu, Jianshi Tang iD, Wen Sun, Zhidong Tang iD, Bin Gao iD, He Qian, Huaqiang Wu iD

ACS Nano · 10.11.2026 · 20 (44) · 29799-29809

DOI: 10.1021/acsnano.6c11854 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 30.10.2026. Verfasst von Ting Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Beijing Advanced Innovation Center for Integrated Circuits, BNRist, Tsinghua University, Beijing100084, China. Die Arbeit nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The absence of a scalable p-type oxide semiconductor remains a major limitation for complementary oxide electronics, in part because improving hole conduction in amorphous oxide networks often coincides with increased defect-mediated leakage. Here, we report an anneal-free, wafer-scale predominantly amorphous tellurium selenium oxide (TeSeOx) p-type oxide semiconductor that achieves a more favorable balance between leakage suppression and hole conduction. Spectroscopic analysis and first-principles calculations indicate that Se incorporation reconfigures the local coordination environment, weakens the strongly Te–Te-dominated connectivity of Te-rich networks, and retains spatially connected valence-band states consistent with the experimentally observed partial recovery of on-state conduction. Consequently, p-channel field-effect transistors fabricated across 4-in. wafers exhibit a final screened yield of 91.4%, a mean mobility of 4.52 cm2 ·V–1 ·s–1, and wafer-scale uniformity without postdeposition annealing of the TeSeOx channel. Temperature-dependent transport measurements further support leakage suppression in the engineered network, with an on/off ratio exceeding 109 at 77 K. As a device-level proof-of-concept relevant to three-dimensional integration, vertically configured TeSeOx PFETs and IGZO NFETs were assembled into complementary inverters and multi-input logic gates, demonstrating correct functionality under a low thermal budget. Collectively, these results support local coordination engineering as a viable route toward scalable amorphous p-type oxide semiconductors for thermally compatible complementary oxide electronics, with potential relevance to 3D integration.

Schlagwörter

Stichwörter der Autor:innen

TeSeOxamorphous oxide semiconductorscomplementary oxide electronicsp-type oxide semiconductorswafer-scale electronics

Autor:innen und Institutionen

  • School of Integrated Circuits, Beijing Advanced Innovation Center for Integrated Circuits, BNRist, Tsinghua University, Beijing100084, China.

ORCID-Profile: Ting Liu, Jianshi Tang, Zhidong Tang, Bin Gao, Huaqiang Wu

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation

Zitieren

APA

Liu, T., Yang, F., Liu, Z., Tang, J., Sun, W., Tang, Z., Gao, B., Qian, H., & Wu, H. (2026). Wafer-Scale p-type TeSeO x for Complementary Oxide Electronics. ACS Nano, 20(44), 29799-29809. https://doi.org/10.1021/acsnano.6c11854

Vancouver

Liu T, Yang F, Liu Z, Tang J, Sun W, Tang Z, et al. Wafer-Scale p-type TeSeO x for Complementary Oxide Electronics. ACS Nano. 2026;20(44):29799-29809. doi:10.1021/acsnano.6c11854

BibTeX
@article{Liu2026,
  author = {Liu, Ting and Yang, Fan and Liu, Ziyi and Tang, Jianshi and Sun, Wen and Tang, Zhidong and Gao, Bin and Qian, He and Wu, Huaqiang},
  title = {Wafer-Scale p-type TeSeO x for Complementary Oxide Electronics},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {44},
  pages = {29799--29809},
  doi = {10.1021/acsnano.6c11854}
}
Kostenlos starten →