EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low-Temperature Growth of Nanostructured Ti–Si–C MAX Phase Coatings Enabled by Highly Ionized Reactive Physical Vapor Deposition

Arno Gitschthaler iD, Philipp Dörflinger, Rainer Hahn, Christian Gutschka, Peter Švec, Eleni Ntemou iD, Daniel Primetzhofer iD, Anton Davydok, Christina Krywka, Jürgen Ramm, Klaus Boebel, Szilard Kolozsvári und 2 weitere

ACS Nano · 17.11.2026

DOI: 10.1021/acsnano.6c10193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 17.11.2026. Verfasst von Arno Gitschthaler und 13 weiteren Autor:innen. Beteiligte Einrichtung: Christian Doppler Laboratory for Surface Engineering of high-performance Components, TU Wien, Wien1060, Austria. Die Arbeit nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ?sterreichische Nationalstiftung f?r Forschung, Technologie und Entwicklung, Slovensk? Akad?mia Vied, UK Research and Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

MAX phases are a unique class of layered compounds that combine metallic and ceramic properties, making them highly attractive as multifunctional materials for next-generation technologies. However, their synthesis typically requires elevated temperatures, posing a major challenge, particularly for thin film growth, where substrate limitations and integration constraints hinder widespread technological implementation. This work demonstrates that highly ionized physical vapor deposition (PVD) techniques can significantly lower the growth temperature required for direct, single-step MAX phase synthesis. Using the archetypal Ti–Si–C system as a benchmark, coatings deposited by reactive cathodic arc evaporation (r-CAE) and reactive high-power impulse magnetron sputtering (r-HiPIMS) at a growth temperature of 550 °C are systematically investigated. By integrating ab initio simulations, synchrotron X-ray diffraction, and atomic-resolution scanning transmission electron microscopy, this study reveals that phase competition and defects are critical factors governing MAX phase formation under kinetically constrained growth conditions. Notably, r-CAE yielded indirect evidence consistent with the formation of a Ti2SiC MAX nanostructure (estimated phase fraction ∼4.5%) embedded within a Ti5Si3Cx matrix, while r-HiPIMS produced a Ti3SiC2 coating with an unconventional in-plane c-axis orientation at a 200 °C lower growth temperature than conventional direct current magnetron sputtering. These findings underscore the potential of highly ionized PVD growth methods to reduce MAX phase synthesis temperatures and expand substrate compatibility, thereby facilitating the broader application of MAX phase coatings.

Schlagwörter

Stichwörter der Autor:innen

MAX phase coatingscathodic arc evaporationdefect chemistryhigh-power impulse magnetron sputteringhighly ionized PVDlow-temperature MAX phase synthesisphase competition

Autor:innen und Institutionen

  • Christian Doppler Laboratory for Surface Engineering of high-performance Components, TU Wien, Wien1060, Austria.
  • Institute of Materials Science and Technology, TU Wien, Wien1060, Austria.
  • Institute of Physics, Slovak Academy of Sciences, BratislavaSK-845 11, Slovakia.
  • Institute of Materials Research, Slovak Academy of Sciences, KošiceSK-040 01, Slovakia.
  • Department of Physics and Astronomy, Uppsala University, Uppsala75105, Sweden.
  • Institute of Materials Physics, Helmholtz Zentrum Hereon, Hamburg22607, Germany.

ORCID-Profile: Arno Gitschthaler, Eleni Ntemou, Daniel Primetzhofer

Förderung

  • ?sterreichische Nationalstiftung f?r Forschung, Technologie und Entwicklung
  • Slovensk? Akad?mia Vied
  • UK Research and Innovation
  • Plansee Composite Materials
  • HORIZON EUROPE Framework Programme
  • NextGenerationEU
  • Austrian Science Fund
  • Oerlikon

Zitieren

APA

Gitschthaler, A., Dörflinger, P., Hahn, R., Gutschka, C., Švec, P., Ntemou, E., Primetzhofer, D., Davydok, A., Krywka, C., Ramm, J., Boebel, K., Kolozsvári, S., Polcik, P., & Riedl, H. (2026). Low-Temperature Growth of Nanostructured Ti–Si–C MAX Phase Coatings Enabled by Highly Ionized Reactive Physical Vapor Deposition. ACS Nano. https://doi.org/10.1021/acsnano.6c10193

Vancouver

Gitschthaler A, Dörflinger P, Hahn R, Gutschka C, Švec P, Ntemou E, et al. Low-Temperature Growth of Nanostructured Ti–Si–C MAX Phase Coatings Enabled by Highly Ionized Reactive Physical Vapor Deposition. ACS Nano. 2026. doi:10.1021/acsnano.6c10193

BibTeX
@article{Gitschthaler2026,
  author = {Gitschthaler, Arno and Dörflinger, Philipp and Hahn, Rainer and Gutschka, Christian and Švec, Peter and Ntemou, Eleni and Primetzhofer, Daniel and Davydok, Anton and Krywka, Christina and Ramm, Jürgen and Boebel, Klaus and Kolozsvári, Szilard and Polcik, Peter and Riedl, Helmut},
  title = {Low-Temperature Growth of Nanostructured Ti–Si–C MAX Phase Coatings Enabled by Highly Ionized Reactive Physical Vapor Deposition},
  journal = {ACS Nano},
  year = {2026},
  doi = {10.1021/acsnano.6c10193}
}
Kostenlos starten →