EUVIMEDEUVIMED entdecken
Crossref

Residual-Strain-Induced Transport Anisotropy in Chemical Vapor Deposition-Grown Monolayer Molybdenum Disulfide

Anindita Chakravarty, Chu Te Chen iD, Anthony Cabanillas iD, Zhengjie Huang, Guangpeng Xu iD, Maomao Liu, Hemendra Nath Jaiswal, Simran Shahi, Charlie Rozeski, Satyajeetsinh Jadeja, Davoud Adinehloo iD, Lunfu Qi und 9 weitere

ACS Nano · 04.08.2026 · 20 (30) · 21351-21362

DOI: 10.1021/acsnano.6c07810 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 18.07.2026. Verfasst von Anindita Chakravarty und 20 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical Engineering, University at Buffalo, The State University of New York, Buffalo, New York14260, United States. Die Arbeit nennt 56 Literaturangaben. Gefördert von: Division of Materials Research, Division of Electrical, Communications and Cyber Systems, Air Force Office of Scientific Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chemical vapor deposition (CVD) is a leading route for scalable integration of two-dimensional semiconductors, but growth can also introduce hidden symmetry-breaking fields absent in ideal crystals. Here, we show that CVD-grown monolayer MoS2, a material expected to exhibit isotropic in-plane transport, develops a pronounced directional charge-transport response due to the built-in residual strain. Angle-resolved electrical measurements reveal an electron-current anisotropy approaching a factor of 2. Comparative studies using as-grown triangular flakes, lithographically reshaped circular channels, and transferred flakes indicate that asymmetric contact geometry is not the dominant origin and instead identify the as-grown interfacial mechanical state as the key source of the anisotropy. Optical and spectroscopic analyses, including self-assembled nanoscroll formation, second-harmonic generation, and polarization-dependent Raman spectroscopy, consistently indicate a built-in in-plane strain field and show that the tensile-loading direction aligns with the transport-enhanced axis. A thermal expansion mismatch estimate supports a residual tensile strain of about 0.5% after growth and cooldown on SiO2/Si. First-principles calculations further show that tensile loading breaks the in-plane symmetry of monolayer MoS2 and produces a modest intrinsic conductivity anisotropy. These results identify residual strain as an underappreciated origin of transport anisotropy in CVD monolayer MoS2.

Schlagwörter

Stichwörter der Autor:innen

2D semiconductorscharge transportchemical vapor depositionmonolayer MoS2residual strain

Autor:innen und Institutionen

  • Department of Electrical Engineering, University at Buffalo, The State University of New York, Buffalo, New York14260, United States.
  • Department of Materials Design and Innovation, University at Buffalo, The State University of New York, Buffalo, New York14260, United States.
  • Department of Materials Science and NanoEngineering, Rice University, Houston, Texas77005, United States.
  • Department of Physics, University at Buffalo, The State University of New York, Buffalo, New York14260, United States.
  • Center for Advanced Semiconductor Technologies, University at Buffalo, The State University of New York, Buffalo, New York14260, United States.
  • Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon16419, Republic of Korea.

ORCID-Profile: Chu Te Chen, Anthony Cabanillas, Guangpeng Xu, Davoud Adinehloo, Pranati Reddy Kuntla, Tim Thomay, Vasili Perebeinos, Woo Jong Yu, Jian Sun, Xuedan Ma, Fei Yao, Huamin Li

Förderung

  • Division of Materials Research
  • Division of Electrical, Communications and Cyber Systems
  • Air Force Office of Scientific Research
  • Center for Advanced Semiconductor Technologies, University at Buffalo
  • Quantum Institute, University at Buffalo

Zitieren

APA

Chakravarty, A., Chen, C. T., Cabanillas, A., Huang, Z., Xu, G., Liu, M., Jaiswal, H. N., Shahi, S., Rozeski, C., Jadeja, S., Adinehloo, D., Qi, L., Kuntla, P. R., Thomay, T., Perebeinos, V., Yu, W. J., Liu, X., Sun, J., Ma, X., …, & Li, H. (2026). Residual-Strain-Induced Transport Anisotropy in Chemical Vapor Deposition-Grown Monolayer Molybdenum Disulfide. ACS Nano, 20(30), 21351-21362. https://doi.org/10.1021/acsnano.6c07810

Vancouver

Chakravarty A, Chen CT, Cabanillas A, Huang Z, Xu G, Liu M, et al. Residual-Strain-Induced Transport Anisotropy in Chemical Vapor Deposition-Grown Monolayer Molybdenum Disulfide. ACS Nano. 2026;20(30):21351-21362. doi:10.1021/acsnano.6c07810

BibTeX
@article{Chakravarty2026,
  author = {Chakravarty, Anindita and Chen, Chu Te and Cabanillas, Anthony and Huang, Zhengjie and Xu, Guangpeng and Liu, Maomao and Jaiswal, Hemendra Nath and Shahi, Simran and Rozeski, Charlie and Jadeja, Satyajeetsinh and Adinehloo, Davoud and Qi, Lunfu and Kuntla, Pranati Reddy and Thomay, Tim and Perebeinos, Vasili and Yu, Woo Jong and Liu, Xiaochi and Sun, Jian and Ma, Xuedan and Yao, Fei and Li, Huamin},
  title = {Residual-Strain-Induced Transport Anisotropy in Chemical Vapor Deposition-Grown Monolayer Molybdenum Disulfide},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {30},
  pages = {21351--21362},
  doi = {10.1021/acsnano.6c07810}
}
Kostenlos starten →