Confined Solvation Electrolyte for 4.3-V-Class High-Voltage Sodium-Ion Pouch Cells
ACS Nano · 28.07.2026 · 20 (29) · 20585-20598
DOI: 10.1021/acsnano.6c03000 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Nano, online erschienen am 12.07.2026. Verfasst von Chenxi Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano), State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong …. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 85 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, State Key Laboratory of New Ceramic Materials Tsinghua University.
Abstract (Originalsprache)
P2-type layered transition metal oxides (NaxTMO2 TM are transition metal elements) are air-stability and low-cost but intrinsically limited in capacity, necessitating elevated charging voltages to unlock deeper Na+ extraction and higher energy density. However, practical high-voltage operation over wide temperature ranges is impeded by sluggish Na+ desolvation, aggravated parasitic reactions, and rapid cycling degradation. Here, we identify 1,1,1-trifluoro-N,N-dimethylmethanesulfonamide (Me2TFMSA) as a polar inducer that restructures Na+ solvation by confining carbonate molecules predominantly within the first solvation sheath, suppressing free-carbonate preferential accumulation at the cathode interface and enabling rapid ligand exchange during desolvation, while FSI– coordination forms an aggregate-rich solvation structure with weakened Na+–solvent interaction. This confining solvation electrolyte (CSE) allows a 4.3 V cutoff (vs 4.1 V conventionally) and delivers a 25.8% capacity gain for P2-type Na0.6[Mg0.04Ca0.02Ti0.1Mn0.55Ni0.29]O2 (NaNMO) cathodes, effectively suppressing parasitic reactions, transition-metal dissolution, surface phase reconstruction, and impedance growth. In 4.3-V-class Ah-level hard carbon||NaNMO pouch cells with the CSE deliver 74.8% capacity retention after 800 cycles at 0.5 C, whereas conventional carbonate electrolytes fail within 200 cycles. Stable performance is achieved from −30 to 45 °C, with good cycling performance at −20 °C. These results correlate solvation confinement with interfacial stability and 4.3-V-class pouch-cell performance in P2-type sodium-ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano), State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, Shaanxi710049, China.
- College of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot010021, China.
- State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai200240, China.
ORCID-Profile: Yao Li, Ding Nan, Weijiang Xue
Förderung
- National Natural Science Foundation of China
- National Key R&D Program of China
- State Key Laboratory of New Ceramic Materials Tsinghua University
Zitieren
APA
Liu, C., Ma, T., Han, X., Li, Y., Nan, D., & Xue, W. (2026). Confined Solvation Electrolyte for 4.3-V-Class High-Voltage Sodium-Ion Pouch Cells. ACS Nano, 20(29), 20585-20598. https://doi.org/10.1021/acsnano.6c03000
Vancouver
Liu C, Ma T, Han X, Li Y, Nan D, Xue W. Confined Solvation Electrolyte for 4.3-V-Class High-Voltage Sodium-Ion Pouch Cells. ACS Nano. 2026;20(29):20585-20598. doi:10.1021/acsnano.6c03000
BibTeX
@article{Liu2026,
author = {Liu, Chenxi and Ma, Ting and Han, Xue and Li, Yao and Nan, Ding and Xue, Weijiang},
title = {Confined Solvation Electrolyte for 4.3-V-Class High-Voltage Sodium-Ion Pouch Cells},
journal = {ACS Nano},
year = {2026},
volume = {20},
number = {29},
pages = {20585--20598},
doi = {10.1021/acsnano.6c03000}
}
EUVIMED