EUVIMEDEUVIMED entdecken
Crossref

Fully Inorganic Hole Contacts Enabled by CeI3 for High-Performance Perovskite Solar Modules

Haoyang Zhang, Kai Sun, Maoyuan Wu, Yifan Jiao, Yanyan Gao, Zexing Zhuang, Huilin Tan, Zhen Wang iD, Jinwei Gao iD, Yousheng Wang iD, Jianzha Zheng, Daxin Xiao und 3 weitere

ACS Nano · 18.08.2026 · 20 (32) · 22422-22434

DOI: 10.1021/acsnano.5c21962 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 07.08.2026. Verfasst von Haoyang Zhang und 14 weiteren Autor:innen. Beteiligte Einrichtung: Institute of New Energy Technology, College of Physics & Optoelectronic Engineering, Jinan University, Guangzhou510632, GuangdongChina. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China (NSFC), Jiangxi Province's Ganpo Talents Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inorganic oxides are widely recognized as stable interfacial materials that can mitigate degradation of perovskite absorbers and prolong device lifetime. However, conventional nickel oxide (NiOx)-based hole-transport layers often suffer from unfavorable energy-level alignment and reactive interfacial defects, while commonly used organic surface modifiers can complicate scalable processing and long-term stability. Here, we introduce cerium iodide (CeI3) as an inorganic interfacial modifier to construct a fully inorganic hole-contact architecture. CeI3 modulates perovskite nucleation and crystallization under ambient processing conditions, producing compact, pinhole-free films with improved coverage. Correlated changes in the oxidation states of Ce, Ni, and Pb after aging, together with reduced iodine loss, support the involvement of Ce species in redox-mediated interfacial regulation. CeI3 modification also improves energy-level alignment and suppresses nonradiative recombination. The resulting devices achieve power conversion efficiencies of 25.19% for 0.113 cm2 cells and 23.37% for 21 cm2 modules, with a geometric fill factor of 98.3%. Encapsulated modules retain 92.3% of their initial efficiency after 1000 h of continuous 1-sun illumination and 95.2% after 1000 h of damp-heat aging at 85 °C/85% RH. Outdoor measurements over one month further demonstrate stable module operation. This ambient-compatible and cost-effective strategy provides a scalable route toward efficient and durable perovskite photovoltaics.

Schlagwörter

Stichwörter der Autor:innen

NiOx-based perovskite solar cellscrystallization dynamicsin-operando interfacial modificationredox-active CeI3stability

Autor:innen und Institutionen

  • Institute of New Energy Technology, College of Physics & Optoelectronic Engineering, Jinan University, Guangzhou510632, GuangdongChina.
  • Guangdong Mellow Energy Co., Ltd., Yuanming Road, Zhuhai519075, Guangdong, China.
  • Institute for Advanced Materials & Guangdong Provincial Key Laboratory of Optical Information Materials and Technology, South China Academy of Advanced Optoelectronics, South China Normal University, Guangzhou510006, Ch…
  • Centre for Advanced Optoelectronics, School of Intelligent Manufacturing and Future Energy, Gannan Normal University, Ganzhou, Jiangxi341000, China.
  • Mellow Energy Changde Institute of New Energy Technology, Dingcheng District, Changde City, Hunan Province415199, China.

ORCID-Profile: Zhen Wang, Jinwei Gao, Yousheng Wang, Shaohang Wu, Jiandong Fan, Yaohua Mai

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China (NSFC)
  • Jiangxi Province's Ganpo Talents Project

Zitieren

APA

Zhang, H., Sun, K., Wu, M., Jiao, Y., Gao, Y., Zhuang, Z., Tan, H., Wang, Z., Gao, J., Wang, Y., Zheng, J., Xiao, D., Wu, S., Fan, J., & Mai, Y. (2026). Fully Inorganic Hole Contacts Enabled by CeI3 for High-Performance Perovskite Solar Modules. ACS Nano, 20(32), 22422-22434. https://doi.org/10.1021/acsnano.5c21962

Vancouver

Zhang H, Sun K, Wu M, Jiao Y, Gao Y, Zhuang Z, et al. Fully Inorganic Hole Contacts Enabled by CeI3 for High-Performance Perovskite Solar Modules. ACS Nano. 2026;20(32):22422-22434. doi:10.1021/acsnano.5c21962

BibTeX
@article{Zhang2026,
  author = {Zhang, Haoyang and Sun, Kai and Wu, Maoyuan and Jiao, Yifan and Gao, Yanyan and Zhuang, Zexing and Tan, Huilin and Wang, Zhen and Gao, Jinwei and Wang, Yousheng and Zheng, Jianzha and Xiao, Daxin and Wu, Shaohang and Fan, Jiandong and Mai, Yaohua},
  title = {Fully Inorganic Hole Contacts Enabled by CeI3 for High-Performance Perovskite Solar Modules},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {32},
  pages = {22422--22434},
  doi = {10.1021/acsnano.5c21962}
}
Kostenlos starten →