EUVIMEDEUVIMED entdecken
Crossref

Thickness-Modulated Band Engineering for Low-Resistance Contacts in Ultrathin Tellurium Transistors

Minjae Kim iD, Junho Ban, Uigwan Shin, Gyeongsu Lee, Jae Hyeon Jun, Hae-Won Lee, Byoung Hun Lee iD

ACS Nano · 07.04.2026 · 20 (13) · 10358-10367

DOI: 10.1021/acsnano.5c18395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 27.03.2026. Verfasst von Minjae Kim und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Nanomaterials Technology, Pohang University of Science and Technology, Cheongam-ro 77, Nam-gu, Pohang, Gyeongbuk 37673, Republ…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: Ministry of Science and ICT, South Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tellurium (Te) is increasingly gaining attention as a scalable p-type channel material owing to its inherently high carrier mobility and ambient stability. However, in sub-5 nm Te channels, high contact resistance remains a major obstacle to achieving high-performance device operation. In this study, an estimated contact resistance of ≈1.7 kΩ·μm is obtained in 4 nm-thick Te channels by engineering the band structure in the source and drain (S/D) regions using a raised source and drain (RSD) structure. To isolate intrinsic contact behavior, electrical measurements are conducted at 77 K, in which thermally activated defect states are suppressed, and carrier injection is dominated by the metal-semiconductor interface. Transport characterization reveals a more than 17-fold increase in on-state current and a more than 50-fold reduction in contact resistance relative to Te devices without the RSD structure. This enhancement is attributed to selectively increasing the Te thickness at the S/D terminals, which tunes the bandgap by thickness-dependent modulation. The resulting RSD architecture enhances tunneling current by narrowing the barrier width─modulated by gate bias. This scalable, low-temperature approach offers broad applicability to other ultrathin channel materials.

Schlagwörter

Stichwörter der Autor:innen

Schottky barriercontact resistancefield-effect-transistorraised source/drain contactstellurium

Autor:innen und Institutionen

  • National Institute for Nanomaterials Technology, Pohang University of Science and Technology, Cheongam-ro 77, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea.
  • Graduate School of Semiconductor Technology, Pohang University of Science and Technology, Cheongam-ro 77, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea.
  • Department of Electrical Engineering, Pohang University of Science and Technology, Cheongam-ro 77, Nam-gu, Pohang, Gyeongbuk 37673, Republic of Korea.

ORCID-Profile: Minjae Kim, Byoung Hun Lee

Förderung

  • Ministry of Science and ICT, South Korea

Zitieren

APA

Kim, M., Ban, J., Shin, U., Lee, G., Jun, J. H., Lee, H. W., & Lee, B. H. (2026). Thickness-Modulated Band Engineering for Low-Resistance Contacts in Ultrathin Tellurium Transistors. ACS Nano, 20(13), 10358-10367. https://doi.org/10.1021/acsnano.5c18395

Vancouver

Kim M, Ban J, Shin U, Lee G, Jun JH, Lee HW, et al. Thickness-Modulated Band Engineering for Low-Resistance Contacts in Ultrathin Tellurium Transistors. ACS Nano. 2026;20(13):10358-10367. doi:10.1021/acsnano.5c18395

BibTeX
@article{Kim2026,
  author = {Kim, Minjae and Ban, Junho and Shin, Uigwan and Lee, Gyeongsu and Jun, Jae Hyeon and Lee, Hae-Won and Lee, Byoung Hun},
  title = {Thickness-Modulated Band Engineering for Low-Resistance Contacts in Ultrathin Tellurium Transistors},
  journal = {ACS Nano},
  year = {2026},
  volume = {20},
  number = {13},
  pages = {10358--10367},
  doi = {10.1021/acsnano.5c18395}
}
Kostenlos starten →