EUVIMEDEUVIMED entdecken
Crossref

Direct Optical Lithography Using Diazirine Cross-Linker for Quantum Dot Light Emitting Diodes and Enhancing Photoluminescence Quantum Yield through Post-treatment

Namji Lee, Donghyun Choi, Keum-Jin Ko iD, Hae-Sik Kim, Jeong Hwan Yu, Jong-Soo Lee iD

ACS Nano · 24.06.2025 · 19 (24) · 22253-22261

DOI: 10.1021/acsnano.5c04130 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 11.06.2025. Verfasst von Namji Lee und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy Science & Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 45 Literaturangaben. Gefördert von: National Research Council of Science and Technology, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The precise patterning of colloidal quantum dots (QDs) is essential for fabricating high-resolution subpixels in optoelectronic devices, including quantum dot light-emitting diodes (QLEDs). However, conventional photolithographic methods using photoresists often result in QD swelling, pattern distortion, and degradation of the optical properties. To overcome these limitations, we propose a direct optical lithography (DOL) approach without a photoresist, utilizing 4-(3-trifluoromethyl)-3H-diazirin-3-yl)benzoic acid (TDBA) as a carbene cross-linker. This method enables the formation of high-resolution QD patterns with feature sizes as small as ∼2 μm while preserving their optical properties. Furthermore, postpatterning thiol-ene treatment using pentaerythritol tetrakis(3-mercaptopropionate) (PETMP) significantly enhances the photoluminescence quantum yield (PLQY), achieving increase compared to pristine QDs. As a proof of concept, we demonstrate red-emitting cross-linked QLEDs with a maximum external quantum efficiency (EQEmax) of 10.3%. Additionally, semitransparent QLEDs incorporating red, green, and blue QDs were fabricated to demonstrate the applicability of this approach for the next generation display applications. Our strategy provides a scalable, high-performance patterning technique with broad potential for advanced optoelectronic devices.

Schlagwörter

Stichwörter der Autor:innen

cross-linkerslight-emitting diodespatterningphotochemistryquantum dots

Autor:innen und Institutionen

  • Department of Energy Science & Engineering, Daegu Gyeongbuk Institute of Science and Technology (DGIST), Daegu 42988, Republic of Korea.
  • Dong-A Carbon Tech, Gyeongsangbuk-do 39801, Republic of Korea.

ORCID-Profile: Keum-Jin Ko, Jong-Soo Lee

Förderung

  • National Research Council of Science and Technology
  • National Research Foundation of Korea

Zitieren

APA

Lee, N., Choi, D., Ko, K. J., Kim, H. S., Yu, J. H., & Lee, J. S. (2025). Direct Optical Lithography Using Diazirine Cross-Linker for Quantum Dot Light Emitting Diodes and Enhancing Photoluminescence Quantum Yield through Post-treatment. ACS Nano, 19(24), 22253-22261. https://doi.org/10.1021/acsnano.5c04130

Vancouver

Lee N, Choi D, Ko KJ, Kim HS, Yu JH, Lee JS. Direct Optical Lithography Using Diazirine Cross-Linker for Quantum Dot Light Emitting Diodes and Enhancing Photoluminescence Quantum Yield through Post-treatment. ACS Nano. 2025;19(24):22253-22261. doi:10.1021/acsnano.5c04130

BibTeX
@article{Lee2025,
  author = {Lee, Namji and Choi, Donghyun and Ko, Keum-Jin and Kim, Hae-Sik and Yu, Jeong Hwan and Lee, Jong-Soo},
  title = {Direct Optical Lithography Using Diazirine Cross-Linker for Quantum Dot Light Emitting Diodes and Enhancing Photoluminescence Quantum Yield through Post-treatment},
  journal = {ACS Nano},
  year = {2025},
  volume = {19},
  number = {24},
  pages = {22253--22261},
  doi = {10.1021/acsnano.5c04130}
}
Kostenlos starten →