Melt-Infusion-Induced Electrolyte Surface Coating Stabilized Sulfide-Based All-Solid-State Lithium Metal Batteries
ACS Nano · 25.03.2025 · 19 (11) · 10912-10921
DOI: 10.1021/acsnano.4c15706 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Nano, online erschienen am 14.03.2025. Verfasst von Shuxian Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, School of Materials Science and Engineering,…. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai.
Abstract (Originalsprache)
Sulfide-based all-solid-state lithium metal batteries (ASSLBs) are a potentially safe and high-energy electrochemical storage technology. The continuous interfacial degradation within sulfide solid-state electrolytes (SSEs) and Li metal however hinders Li+ transport and induces inhomogeneous Li deposition. Herein, we propose a melt-infusion method to introduce lithium trifluorosulfonylimide (LiTFSI) on Li5.5PS4.5Cl1.5 (LPSCl) particles as an artificial coating. This artificial coating can mitigate interfacial side reactions and induce the generation of the LiF/Li3N-rich solid electrolyte interphase (SEI). The combined experimental and theoretical results reveal that this LiF/Li3N-rich SEI has the merits of accelerating Li+ transport and suppressing Li dendrites. It enables the Li anode to reach a high critical current density (CCD) up to 3.1 mA cm–2. In conjunction with coated sulfide SSEs, Li-symmetric cells operate stably for 900 h at 2 mA cm–2. The ASSLBs using this coated sulfide SSEs can reversibly charge/discharge at 2C over 1000 cycles with a 90.2% capacity retention. A high LiCoO2 loading of 28.5 mg cm–2 is further demonstrated in this ASSLB with cycling stability over 100 cycles at 0.2C.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials, Ministry of Education, School of Materials Science and Engineering, Shandong University, Jinan 250061, China.
- Key Laboratory of High Efficiency and Clean Mechanical Manufacture of Ministry of Education, National Demonstration Center for Experimental Mechanical Engineering Education, School of Mechanical Engineering, Shandong Un…
- Key Laboratory of Advanced Energy Materials Chemistry (Ministry of Education), Nankai University, Tianjin 300071, China.
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, Yantai 264003, China.
ORCID-Profile: Chengxiang Wang, Yinghua Qiu, Longwei Yin, Rutao Wang
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai
Zitieren
APA
Zhang, S., Li, Q., Gao, J., Liu, R., Jiang, X., Xiong, S., Wang, C., Zhang, Z., Qiu, Y., Shi, Y., Yin, L., & Wang, R. (2025). Melt-Infusion-Induced Electrolyte Surface Coating Stabilized Sulfide-Based All-Solid-State Lithium Metal Batteries. ACS Nano, 19(11), 10912-10921. https://doi.org/10.1021/acsnano.4c15706
Vancouver
Zhang S, Li Q, Gao J, Liu R, Jiang X, Xiong S, et al. Melt-Infusion-Induced Electrolyte Surface Coating Stabilized Sulfide-Based All-Solid-State Lithium Metal Batteries. ACS Nano. 2025;19(11):10912-10921. doi:10.1021/acsnano.4c15706
BibTeX
@article{Zhang2025,
author = {Zhang, Shuxian and Li, Qingyu and Gao, Jing and Liu, Renbo and Jiang, Xiaobo and Xiong, Shijian and Wang, Chengxiang and Zhang, Zhiwei and Qiu, Yinghua and Shi, Yuanchang and Yin, Longwei and Wang, Rutao},
title = {Melt-Infusion-Induced Electrolyte Surface Coating Stabilized Sulfide-Based All-Solid-State Lithium Metal Batteries},
journal = {ACS Nano},
year = {2025},
volume = {19},
number = {11},
pages = {10912--10921},
doi = {10.1021/acsnano.4c15706}
}
EUVIMED