EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY-NC-ND 4.0

Enhancing Liquid–Vapor Phase-Change Heat Transfer with Micro/Nano-Structured Surfaces

Xiuliang Liu, Jianye Yang, Qifan Zou, Yongyan Hu, Pengkun Li, Li Tan, Nenad Miljkovic iD, Ronggui Yang iD

ACS Nano · 18.03.2025 · 19 (10) · 9513-9589

DOI: 10.1021/acsnano.4c15277 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift ACS Nano, online erschienen am 10.03.2025. Verfasst von Xiuliang Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. Die Arbeit wurde bisher 189-mal zitiert (Crossref) und nennt 610 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Ministry of Education, Culture, Sports, Science and Technology, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Liquid-vapor phase-change heat transfer plays an important role in many industrial systems, ranging from power generation and air conditioning to water desalination, food processing, and thermal management of electronics and data centers. Recent advances in micro/nanofabrication have enabled desirable manipulation of multiscale dynamics governing droplet/bubble motion and capillary liquid flows for highly efficient phase-change heat transfer. However, there lacks a comprehensive review on the design and fabrication of micro/nanostructured surfaces with controlled morphology and wettability, to enhance the diverse phase-change heat transfer processes. Here, we review the advances in micro/nanostructuring for phase-change heat transfer applications. While traditional mechanical machining and sintering have commonly been used to manufacture structures down to sub-millimeter or micron scales, advanced micro/nanostructure fabrication methods such as laser texturing, oxidation, lithography-based etching, and spray coating are being utilized to manufacture surfaces with hierarchical structures or heterogeneous wettability. Droplets, bubbles, and liquid films generally experience a multiscale life cycle from nanometer scale to millimeter scale in the phase-change processes, including condensation, pool boiling, capillary-driven evaporation, and liquid film boiling. Micro/nanostructured surfaces need to be designed to coordinate different requirements of the surface wettability and morphology for the multiscale dynamics of droplets, bubbles, and films including increased nucleation, facilitated growth, accelerated transport, and departure. For active phase-change processes with pump-driven flow, including flow condensation, flow boiling, jet impingement boiling, and spray cooling, the enhancement strategies using functionalized micro/nanostructures focus on sustaining thin liquid films, strengthening thin film evaporation, promoting nucleate boiling, and regulating bubble departure within the convective liquid film. We conclude this review by a short discussion on the practical aspects of micro/nanoenabled phase-change heat transfer including reliability and scalability.

Schlagwörter

Stichwörter der Autor:innen

capillary-driven evaporationcondensation and boilingflow condensation and boilingjet impingement boilingliquid film boilingmicro/nanostructuresphase change heat transferspray coolingthermal ground planethermal management

Autor:innen und Institutionen

  • School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China.
  • Department of Mechanical Science and Engineering, University of Illinois at Urbana - Champaign, Urbana, Illinois 61801, United States.
  • College of Engineering, Peking University, Beijing 100871, China.
  • China Mobile Group Design Institute Co., Ltd., Beijing 100080, China.

ORCID-Profile: Nenad Miljkovic, Ronggui Yang

Förderung

  • Ministry of Education, Culture, Sports, Science and Technology
  • National Natural Science Foundation of China

Zitieren

APA

Liu, X., Yang, J., Zou, Q., Hu, Y., Li, P., Tan, L., Miljkovic, N., & Yang, R. (2025). Enhancing Liquid–Vapor Phase-Change Heat Transfer with Micro/Nano-Structured Surfaces. ACS Nano, 19(10), 9513-9589. https://doi.org/10.1021/acsnano.4c15277

Vancouver

Liu X, Yang J, Zou Q, Hu Y, Li P, Tan L, et al. Enhancing Liquid–Vapor Phase-Change Heat Transfer with Micro/Nano-Structured Surfaces. ACS Nano. 2025;19(10):9513-9589. doi:10.1021/acsnano.4c15277

BibTeX
@article{Liu2025,
  author = {Liu, Xiuliang and Yang, Jianye and Zou, Qifan and Hu, Yongyan and Li, Pengkun and Tan, Li and Miljkovic, Nenad and Yang, Ronggui},
  title = {Enhancing Liquid–Vapor Phase-Change Heat Transfer with Micro/Nano-Structured Surfaces},
  journal = {ACS Nano},
  year = {2025},
  volume = {19},
  number = {10},
  pages = {9513--9589},
  doi = {10.1021/acsnano.4c15277}
}
Kostenlos starten →