Designing Carbon-Foam Composites via Molten-State Reduction for Multifunctional Electromagnetic Interference Shielding
ACS Nano · 14.01.2025 · 19 (1) · 1198-1210
DOI: 10.1021/acsnano.4c13329 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Nano, online erschienen am 03.01.2025. Verfasst von Heguang Liu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 61-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Education Department of Shaanxi Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
Advanced electromagnetic interference (EMI) shielding materials are in great demand because of the severe electromagnetic population problem caused by the explosive growth of advanced electronics. Besides superior EMI shielding properties, the mechanical strength of the shielding materials is also critical for some specific application scenarios (e.g., shielding cases and shielding frames). Although most reported EMI shielding materials possess good shielding properties and lightweight characteristics, they usually exhibit a poor mechanical strength. Concurrently, multifunctionality is also essential for the application of the EMI shielding material. This study develops a molten-state-based in situ reduction strategy to fabricate an efficient EMI shielding composite, enabling the uniform dispersion of Co-nanoparticles on the carbon form matrix while featuring a high density of defects. This ensures the high mechanical strength of the composite due to the presence of a huge interface and significantly enhances the EMI shielding performance. The composite achieves an optimal shielding effectiveness of 32.6 dB and compressive strength of 38.31 MPa, respectively, improved by 65.4 and 123.4% compared to the pristine carbon foam. Simultaneously, the composite also exhibits desirable electrochemical and photothermal conversion properties. This research offers insights into the design of composites that excel in electromagnetic interference shielding, mechanical robustness, and multifunctionality.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China.
- Materials Genome Institute, Shanghai University, Shanghai 200444, China.
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
- NanoScience Technology Center, Department of Materials Science and Engineering, Department of Chemistry, Renewable Energy and Chemical Transformation Cluster, The Stephen W. Hawking Center for Microgravity Research and…
ORCID-Profile: Qianqian Li, Chuanyin Xiong, Yang Yang
Förderung
- Education Department of Shaanxi Province
- National Natural Science Foundation of China
Zitieren
APA
Liu, H., Lei, F., Xu, W., Li, Q., Lei, C., Xiong, C., Tian, N., You, C., & Yang, Y. (2025). Designing Carbon-Foam Composites via Molten-State Reduction for Multifunctional Electromagnetic Interference Shielding. ACS Nano, 19(1), 1198-1210. https://doi.org/10.1021/acsnano.4c13329
Vancouver
Liu H, Lei F, Xu W, Li Q, Lei C, Xiong C, et al. Designing Carbon-Foam Composites via Molten-State Reduction for Multifunctional Electromagnetic Interference Shielding. ACS Nano. 2025;19(1):1198-1210. doi:10.1021/acsnano.4c13329
BibTeX
@article{Liu2025,
author = {Liu, Heguang and Lei, Fengyu and Xu, Wanyin and Li, Qianqian and Lei, Chao and Xiong, Chuanyin and Tian, Na and You, Caiyin and Yang, Yang},
title = {Designing Carbon-Foam Composites via Molten-State Reduction for Multifunctional Electromagnetic Interference Shielding},
journal = {ACS Nano},
year = {2025},
volume = {19},
number = {1},
pages = {1198--1210},
doi = {10.1021/acsnano.4c13329}
}
EUVIMED