EUVIMEDEUVIMED entdecken
Crossref

In Situ Ceramization of Nanoscale Interface Enables Aerogel with Thermal Protection at 1950 °C

Quan Yuan, Liwei Yan, Jinfeng Tian, Weiyi Ding, Zhengguang Heng iD, Mei Liang, Yang Chen iD, Huawei Zou iD

ACS Nano · 30.01.2024 · 18 (4) · 3520-3530

DOI: 10.1021/acsnano.3c11129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 17.01.2024. Verfasst von Quan Yuan und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China. Die Arbeit wurde bisher 74-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: State Key Laboratory of Polymer Materials Engineering, National Natural Science Foundation of China, Key Laboratory of Advanced Functional Composite Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional carbon fiber felt-reinforced aerogel composites are often used as lightweight thermal protection systems (TPSs) for aerospace craft. However, due to their poor oxidation resistance, they have gradually failed to handle increasingly harsh thermal environments. In this work, a nanoscale composite coating interface of SiC-ZrC ceramic precursor is first constructed on the fiber surface. Subsequently, using the coated fiber felt as a three-dimensional skeleton and through polymerization-induced phase separation, an aerogel composite with excellent thermal protection in extreme thermal environments is prepared. Owing to the in situ ceramization of this nanoscale interface at ultrahigh temperatures, the back temperature of the 12 mm thick aerogel is only 147 °C after exposure to an oxyacetylene flame at 1950 °C for 70 s. Meanwhile, the central region of the aerogel recedes by only 7%. Not only does this work provide a way to enhance aerogels by constructing a self-ceramizable nanoscale interface it is also expected that the developed aerogel composite can be applied in the ultrahigh-temperature thermal protection of future aerospace craft.

Schlagwörter

Stichwörter der Autor:innen

ablationaerogelcarbon fiber feltceramic precursorceramizationthermal insulation

Autor:innen und Institutionen

  • State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China.

ORCID-Profile: Zhengguang Heng, Yang Chen, Huawei Zou

Förderung

  • State Key Laboratory of Polymer Materials Engineering
  • National Natural Science Foundation of China
  • Key Laboratory of Advanced Functional Composite Technology

Zitieren

APA

Yuan, Q., Yan, L., Tian, J., Ding, W., Heng, Z., Liang, M., Chen, Y., & Zou, H. (2024). In Situ Ceramization of Nanoscale Interface Enables Aerogel with Thermal Protection at 1950 °C. ACS Nano, 18(4), 3520-3530. https://doi.org/10.1021/acsnano.3c11129

Vancouver

Yuan Q, Yan L, Tian J, Ding W, Heng Z, Liang M, et al. In Situ Ceramization of Nanoscale Interface Enables Aerogel with Thermal Protection at 1950 °C. ACS Nano. 2024;18(4):3520-3530. doi:10.1021/acsnano.3c11129

BibTeX
@article{Yuan2024,
  author = {Yuan, Quan and Yan, Liwei and Tian, Jinfeng and Ding, Weiyi and Heng, Zhengguang and Liang, Mei and Chen, Yang and Zou, Huawei},
  title = {In Situ Ceramization of Nanoscale Interface Enables Aerogel with Thermal Protection at 1950 °C},
  journal = {ACS Nano},
  year = {2024},
  volume = {18},
  number = {4},
  pages = {3520--3530},
  doi = {10.1021/acsnano.3c11129}
}
Kostenlos starten →