EUVIMEDEUVIMED entdecken
Crossref

Macroscale Superlubricity Induced by MXene/MoS 2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses

Ali Macknojia, Aditya Ayyagari, Dario Zambrano iD, Andreas Rosenkranz iD, Elena V Shevchenko iD, Diana Berman iD

ACS Nano · 14.02.2023 · 17 (3) · 2421-2430

DOI: 10.1021/acsnano.2c09640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Nano, online erschienen am 25.01.2023. Verfasst von Ali Macknojia und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, The University of North Texas, Denton, Texas 76203, United States. Die Arbeit wurde bisher 161-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: Division of Civil, Mechanical and Manufacturing Innovation, Fondo Nacional de Desarrollo Científico y Tecnológico.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Toward the goal of achieving superlubricity, or near-zero friction, in industrially relevant material systems, solution-processed multilayer Ti3C2Tx-MoS2 blends are spray-coated onto rough 52100-grade steel surfaces as a solid lubricant. The tribological performance was assessed in a ball-on-disk configuration in a unidirectional sliding mode. The test results indicate that Ti3C2Tx-MoS2 nanocomposites led to superlubricious states, which has hitherto been unreported for both individual pristine materials, MoS2 and Ti3C2Tx, under macroscale sliding conditions, indicating a synergistic mechanism enabling the superlative performance. The processing, structure, and property correlation were studied to understand the underlying phenomena. Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy revealed the formation of an in situ robust tribolayer that was responsible for the performance at high contact pressures (>1.1 GPa) and sliding speeds (0.1 m/s). This report presents the lowest friction obtained by either MoS2 or MXene or any combination of the two so far.

Schlagwörter

Stichwörter der Autor:innen

MXenesfrictionmolybdenum disulfidesolid lubricationsteelsuperlubricitywear

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, The University of North Texas, Denton, Texas 76203, United States.
  • Department of Chemical Engineering, Biotechnology and Materials (FCFM), University of Chile, Santiago, 8370456, Chile.
  • Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439, United States.
  • Department of Chemistry and James Frank Institute, University of Chicago, Chicago, Illinois 60637, United States.

ORCID-Profile: Dario Zambrano, Andreas Rosenkranz, Elena V Shevchenko, Diana Berman

Förderung

  • Division of Civil, Mechanical and Manufacturing Innovation
  • Fondo Nacional de Desarrollo Científico y Tecnológico

Zitieren

APA

Macknojia, A., Ayyagari, A., Zambrano, D., Rosenkranz, A., Shevchenko, E. V., & Berman, D. (2023). Macroscale Superlubricity Induced by MXene/MoS 2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses. ACS Nano, 17(3), 2421-2430. https://doi.org/10.1021/acsnano.2c09640

Vancouver

Macknojia A, Ayyagari A, Zambrano D, Rosenkranz A, Shevchenko EV, Berman D. Macroscale Superlubricity Induced by MXene/MoS 2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses. ACS Nano. 2023;17(3):2421-2430. doi:10.1021/acsnano.2c09640

BibTeX
@article{Macknojia2023,
  author = {Macknojia, Ali and Ayyagari, Aditya and Zambrano, Dario and Rosenkranz, Andreas and Shevchenko, Elena V and Berman, Diana},
  title = {Macroscale Superlubricity Induced by MXene/MoS 2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses},
  journal = {ACS Nano},
  year = {2023},
  volume = {17},
  number = {3},
  pages = {2421--2430},
  doi = {10.1021/acsnano.2c09640}
}
Kostenlos starten →