Charge-Driven Engineering of Titanium Implants with Chitosan and Poly- l -Lysine for Dual Antiadhesive and Anticorrosive Functionality
ACS Materials Au · 11.11.2026 · 6 (6) · 1579-1600
DOI: 10.1021/acsmaterialsau.6c00178 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Materials Au, online erschienen am 22.10.2026. Verfasst von Ayrton G Silva und 14 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics and Periodontology, Piracicaba Dental School, Universidade Estadual de Campinas (UNICAMP), Av. Limeira 901, Piracicaba, …. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Funda??o de Amparo ? Pesquisa do Estado de S?o Paulo, Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior, Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico.
Abstract (Originalsprache)
Peri-implant infections remain a major cause of implant failure, motivating the development of multifunctional titanium surfaces capable of preventing bacterial colonization while preserving implant performance. Herein, a chitosan/poly-l-lysine (CH-PLL) bilayer coating was engineered on hydroxyl-rich titanium surfaces generated by hydrothermal treatment (HT) or plasma electrolytic oxidation (PEO). We hypothesized that the CH-PLL bilayer would establish a stable cationic interface capable of impairing early bacterial adhesion and modulating polymicrobial biofilm development, whereas the PEO substrate would provide superior mechanical and electrochemical stability. Surface characterization confirmed successful bilayer formation and showed that PLL functionalization increased positive surface charge and hydrophilicity while improving tribological and electrochemical performance, with the PEO@CH-PLL coating exhibiting a friction coefficient of ∼0.01 and significantly enhanced corrosion resistance (P < 0.05). Accordingly, PLL-coated surfaces reduced bacterial adhesion by 3.9 and 3.1 log CFU for Staphylococcus aureus and Escherichia coli, respectively. Against a saliva-derived polymicrobial biofilm, the coating reduced the total bacterial burden by ∼1.8 log while suppressing disease-related peri-implant pathogens. Importantly, these antibacterial effects were accompanied by preserved protein adsorption and enhanced preosteoblastic activity after 7 days. Collectively, these findings demonstrate that combining a stable cationic CH-PLL interface with a PEO-generated oxide layer provides a multifunctional titanium surface integrating biofilm control with improved mechanical, electrochemical, and biological performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics and Periodontology, Piracicaba Dental School, Universidade Estadual de Campinas (UNICAMP), Av. Limeira 901, Piracicaba, São Paulo 13414-903, Brazil.
- Laboratory of Technological Plasmas, Institute of Science and Technology, São Paulo State University (UNESP), Av. Três de Março 511, Sorocaba, São Paulo 18087-180, Brazil.
- Department of Mechanical Engineering, University of São Paulo (USP), Trabalhador São Carlense, 400, São Carlos, São Paulo 13566-590, Brazil.
- Faculdade Israelita de Ciências da Saúde Albert Einstein, Hospital Israelita Albert Einstein, Av. Padre Lebret, São Paulo, São Paulo 05653-120, Brazil.
- Dental Research Division, Universidade Universus Veritas Guarulhos (UNG), Praça Tereza Cristina 88, Guarulhos, São Paulo 07023-070, Brazil.
- BioMet-CAM Laboratory, Department of Materials Engineering (DEMa), Universidade Federal de São Carlos (UFSCar), Rodoviária Washington Luis, São Carlos, São Paulo 13565-905, Brazil.
ORCID-Profile: Nilson C da Cruz, Elidiane C Rangel, Conrado R M Afonso, João Gabriel S Souza, Xi Rao, Liqun Xu, Bruna E Nagay, Valentim A R Barão
Förderung
- Funda??o de Amparo ? Pesquisa do Estado de S?o Paulo
- Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior
- Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico
Zitieren
APA
Silva, A. G., Dos S Silva, J. P., Cordeiro, J. V. C., da Cruz, N. C., Rangel, E. C., Fortulan, C. A., Shibli, J. A., Afonso, C. R. M., Dos Santos, D. G. S., Figueiredo, L., Souza, J. G. S., Rao, X., Xu, L., Nagay, B. E., & Barão, V. A. R. (2026). Charge-Driven Engineering of Titanium Implants with Chitosan and Poly- l -Lysine for Dual Antiadhesive and Anticorrosive Functionality. ACS Materials Au, 6(6), 1579-1600. https://doi.org/10.1021/acsmaterialsau.6c00178
Vancouver
Silva AG, Dos S Silva JP, Cordeiro JVC, da Cruz NC, Rangel EC, Fortulan CA, et al. Charge-Driven Engineering of Titanium Implants with Chitosan and Poly- l -Lysine for Dual Antiadhesive and Anticorrosive Functionality. ACS Materials Au. 2026;6(6):1579-1600. doi:10.1021/acsmaterialsau.6c00178
BibTeX
@article{Silva2026,
author = {Silva, Ayrton G and Dos S Silva, João Pedro and Cordeiro, João Victor C and da Cruz, Nilson C and Rangel, Elidiane C and Fortulan, Carlos A and Shibli, Jamil A and Afonso, Conrado R M and Dos Santos, Daniel G S and Figueiredo, Luciene and Souza, João Gabriel S and Rao, Xi and Xu, Liqun and Nagay, Bruna E and Barão, Valentim A R},
title = {Charge-Driven Engineering of Titanium Implants with Chitosan and Poly- l -Lysine for Dual Antiadhesive and Anticorrosive Functionality},
journal = {ACS Materials Au},
year = {2026},
volume = {6},
number = {6},
pages = {1579--1600},
doi = {10.1021/acsmaterialsau.6c00178}
}
EUVIMED