EUVIMEDEUVIMED entdecken
Crossref

Tunable and Photomodifiable Nonisocyanate Polyurethanes from Lignin-Based Cyclic Carbonates Bearing α,β-Unsaturated Ketone

Guang Zhao, Wentao Liu, Yang You iD, Yunqi Li iD, Qin Chen iD, Haibo Xie iD

ACS Macro Letters · 20.01.2026 · 15 (1) · 67-75

DOI: 10.1021/acsmacrolett.5c00621 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Macro Letters, online erschienen am 16.12.2025. Verfasst von Guang Zhao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymeric Materials & Engineering, College of Materials & Metallurgy, Guizhou University, Huaxi District, Guiyang 550025, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Science and Technology Program of Guizhou Province, National Natural Science Foundation of China, Qiankehe-Central Government Guided Local Development Funds.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lignin-based nonisocyanate polyurethanes (NIPUs) with tunable properties and photomodifiable capability were prepared through polyaddition of diamines and lignin-based bis-cyclic carbonates bearing α,β-unsaturated ketone. These bis-cyclic carbonates were synthesized from lignin-based phenols via Aldol condensation, O-glycidylation and cycloaddition of CO2. Model reaction of vanillin-based cyclic carbonate (BVKCC) and n-hexylamine confirmed efficient aminolysis of cyclic carbonate and partial aza-Michael addition of α,β-unsaturated ketones at ambient temperature. Significantly, this aza-Michael adduct reverted quantitatively to the original α,β-unsaturated ketone upon heating to 100 °C. Aminolysis kinetics of BVKCC and n-hexylamine was investigated by 1H NMR and DFT calculation. TGA, DSC and tensile tests revealed that these NIPUs exhibited excellent thermal and mechanical properties with Td5%, Tg and tensile strength reaching up to 318 °C, 60.2 °C and 44.5 MPa, respectively. Crucially, the retained α,β-unsaturated ketone enables facile postpolymerization modification via UV-triggered [2 + 2] cycloaddition, leading to a significant enhancement of thermal properties.

Autor:innen und Institutionen

  • Department of Polymeric Materials & Engineering, College of Materials & Metallurgy, Guizhou University, Huaxi District, Guiyang 550025, China.
  • Technology Innovation Center for High-Efficiency Utilization of Bamboo-Based Biomass in Guizhou Province, Guiyang 550025, China.

ORCID-Profile: Yang You, Yunqi Li, Qin Chen, Haibo Xie

Förderung

  • Science and Technology Program of Guizhou Province
  • National Natural Science Foundation of China
  • Qiankehe-Central Government Guided Local Development Funds
  • Guizhou Provincial Basic Research Program
  • Qiankehe-Platform

Zitieren

APA

Zhao, G., Liu, W., You, Y., Li, Y., Chen, Q., & Xie, H. (2026). Tunable and Photomodifiable Nonisocyanate Polyurethanes from Lignin-Based Cyclic Carbonates Bearing α,β-Unsaturated Ketone. ACS Macro Letters, 15(1), 67-75. https://doi.org/10.1021/acsmacrolett.5c00621

Vancouver

Zhao G, Liu W, You Y, Li Y, Chen Q, Xie H. Tunable and Photomodifiable Nonisocyanate Polyurethanes from Lignin-Based Cyclic Carbonates Bearing α,β-Unsaturated Ketone. ACS Macro Letters. 2026;15(1):67-75. doi:10.1021/acsmacrolett.5c00621

BibTeX
@article{Zhao2026,
  author = {Zhao, Guang and Liu, Wentao and You, Yang and Li, Yunqi and Chen, Qin and Xie, Haibo},
  title = {Tunable and Photomodifiable Nonisocyanate Polyurethanes from Lignin-Based Cyclic Carbonates Bearing α,β-Unsaturated Ketone},
  journal = {ACS Macro Letters},
  year = {2026},
  volume = {15},
  number = {1},
  pages = {67--75},
  doi = {10.1021/acsmacrolett.5c00621}
}
Kostenlos starten →