EUVIMEDEUVIMED entdecken
Crossref

Multiobjective Optimization of Cross-Flow Membrane Channel Geometry via Integrated CFD Modeling and RSM-Desirability Function Analysis

Dinghao Ma, Zile Chen, Zhe Yang, Maojun Ye, Yahui Zhu, Yizhen Zhang, Wentao Shang

ACS ES&T Water · 13.11.2026 · 6 (11) · 7175-7184

DOI: 10.1021/acsestwater.6c00507 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS ES&T Water, online erschienen am 08.10.2026. Verfasst von Dinghao Ma und 6 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Basic and Applied Basic Research Foundation of Guangdong Province, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pressure-driven membrane separation processes are pivotal for seawater desalination and wastewater recovery. However, the geometric configuration of the flow channel strongly influences mass-transfer performance and energy consumption. This study applies an integrated three-dimensional computational fluid dynamics (CFD) and response surface methodology (RSM) framework to optimize length-to-height (L/H) and length-to-width (L/W) ratios of cross-flow membrane channels for concentration polarization (CP) mitigation and hydraulic pressure drop (ΔP) reduction. A 13-point central composite design (CCD) was employed to construct second-order polynomial response-surface models (R2 > 0.95). To address the tradeoff between CP mitigation and energy consumption, a desirability-function multiobjective optimization was performed and validated using the nondominated sorting genetic algorithm II (NSGA-II). Results demonstrate that surface solute concentration exhibits a nonmonotonic, U-shaped dependence on L/H, whereas ΔP increases nonlinearly with vertical confinement. The optimal compromise geometry (L/H = 33 and L/W = 3), achieved a 2.21% reduction in the maximum CP and a 66.86% decrease in ΔP relative to the reference design. Six independent CFD validation simulations confirmed the model’s interpolation accuracy, yielding mean relative errors of 0.134% for CP and 1.050% for ΔP. These findings provide a numerically supported, application-specific physical threshold for scaling highly efficient, low-energy membrane modules.

Förderung

  • Basic and Applied Basic Research Foundation of Guangdong Province
  • National Natural Science Foundation of China

Zitieren

APA

Ma, D., Chen, Z., Yang, Z., Ye, M., Zhu, Y., Zhang, Y., & Shang, W. (2026). Multiobjective Optimization of Cross-Flow Membrane Channel Geometry via Integrated CFD Modeling and RSM-Desirability Function Analysis. ACS ES&T Water, 6(11), 7175-7184. https://doi.org/10.1021/acsestwater.6c00507

Vancouver

Ma D, Chen Z, Yang Z, Ye M, Zhu Y, Zhang Y, et al. Multiobjective Optimization of Cross-Flow Membrane Channel Geometry via Integrated CFD Modeling and RSM-Desirability Function Analysis. ACS ES&T Water. 2026;6(11):7175-7184. doi:10.1021/acsestwater.6c00507

BibTeX
@article{Ma2026,
  author = {Ma, Dinghao and Chen, Zile and Yang, Zhe and Ye, Maojun and Zhu, Yahui and Zhang, Yizhen and Shang, Wentao},
  title = {Multiobjective Optimization of Cross-Flow Membrane Channel Geometry via Integrated CFD Modeling and RSM-Desirability Function Analysis},
  journal = {ACS ES&T Water},
  year = {2026},
  volume = {6},
  number = {11},
  pages = {7175--7184},
  doi = {10.1021/acsestwater.6c00507}
}
Kostenlos starten →