EUVIMEDEUVIMED entdecken
Crossref

Modeling Closed- and Open-End Gas-Transfer Kinetics for Syngas Components in Nonporous Hollow-Fiber Membranes

Kartik Bhagat, Patricia Perez-Calleja, Yong Gu, Grayson Young, Christopher Muse, Robert Nerenberg, David Nielsen, Everett Eustance, YenJung Sean Lai, Bruce E. Rittmann

ACS ES&T Engineering · 13.11.2026 · 6 (11) · 3262-3270

DOI: 10.1021/acsestengg.6c00637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS ES&T Engineering, online erschienen am 26.10.2026. Verfasst von Kartik Bhagat und 9 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Gefördert von: Arizona State University, Division of Chemical, Bioengineering, Environmental, and Transport Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Syngas fermentation using hollow-fiber membrane (HFM) bioreactors is promising for converting its CO, H2, and CO2 into valuable organic chemicals. While operating the membranes in a closed-end configuration delivers 100% of the supplied syngas to the biofilm on the membranes’ outer surface, back-diffusion of water vapor into the membrane lumen dilutes CO, H2, and CO2, which slows the gas-transfer rate. This study investigated two partial open-end configurations designed to mitigate water-vapor accumulation in the lumen: periodic venting and a slow bleed flow. Experiments quantified the effects of these configurations on substrate–gas fluxes and gas-transfer efficiency. Venting and bleed configurations increased syngas component fluxes by approximately 2-fold and up to 3.6-fold, respectively. Mechanistic modeling explained how venting and bleed prevented a large accumulation of water vapor, which maintained lumen concentrations of CO, H2, and CO2 at their maximal levels. However, venting and bleed also led to advective losses that lowered the gas-transfer efficiency. For the conditions tested experimentally, experiments and modeling identified that the best combination for achieving high fluxes and gas-transfer efficiency was the bleed configuration with a flow rate of 0.025%–0.05% of total open-end flow rate. These results demonstrate that partial open-end operation can improve gas-transfer kinetics while maintaining low advective losses, providing a rational basis for process optimization and scale-up of HFM-based syngas fermentation.

Förderung

  • Arizona State University
  • Division of Chemical, Bioengineering, Environmental, and Transport Systems

Zitieren

APA

Bhagat, K., Perez-Calleja, P., Gu, Y., Young, G., Muse, C., Nerenberg, R., Nielsen, D., Eustance, E., Lai, Y. S., & Rittmann, B. E. (2026). Modeling Closed- and Open-End Gas-Transfer Kinetics for Syngas Components in Nonporous Hollow-Fiber Membranes. ACS ES&T Engineering, 6(11), 3262-3270. https://doi.org/10.1021/acsestengg.6c00637

Vancouver

Bhagat K, Perez-Calleja P, Gu Y, Young G, Muse C, Nerenberg R, et al. Modeling Closed- and Open-End Gas-Transfer Kinetics for Syngas Components in Nonporous Hollow-Fiber Membranes. ACS ES&T Engineering. 2026;6(11):3262-3270. doi:10.1021/acsestengg.6c00637

BibTeX
@article{Bhagat2026,
  author = {Bhagat, Kartik and Perez-Calleja, Patricia and Gu, Yong and Young, Grayson and Muse, Christopher and Nerenberg, Robert and Nielsen, David and Eustance, Everett and Lai, YenJung Sean and Rittmann, Bruce E.},
  title = {Modeling Closed- and Open-End Gas-Transfer Kinetics for Syngas Components in Nonporous Hollow-Fiber Membranes},
  journal = {ACS ES&T Engineering},
  year = {2026},
  volume = {6},
  number = {11},
  pages = {3262--3270},
  doi = {10.1021/acsestengg.6c00637}
}
Kostenlos starten →