Dual Embossment Modes During Pilot-Scale Ultra-High Pressure Reverse Osmosis of Hypersaline Oilfield-Produced Water: Preferential Scalant Accumulation Along Imprints of Intruded Permeate Spacers
ACS ES&T Engineering · 13.11.2026 · 6 (11) · 3248-3261
DOI: 10.1021/acsestengg.6c00635 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS ES&T Engineering, online erschienen am 17.10.2026. Verfasst von Kaiya Shealy und 6 weiteren Autor:innen. Die Arbeit nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Chemical, Bioengineering, Environmental, and Transport Systems.
Abstract (Originalsprache)
Desalination of hypersaline brines is garnering increasing interest, which demands novel technologies. To this effect, we report a comprehensive autopsy of pilot-scale ultra-high pressure reverse osmosis (UHPRO) membranes operated in batch mode harvested from a produced water beneficial reuse treatment plant in the Permian Basin, Texas. Physical-chemical alterations of membranes due to operation at 1,650 psi, including dissimilar embossment behavior on either side of the permeate spacer, were diagnosed. On one side, the ridge and valley morphology created by the knitted spacer filaments caused inelastic wavelike membrane deformation. On the other side, spacer filaments were in-plane with each other, which only embossed membranes and did not cause substantial or permanent deformation. Scalants appeared to be preferentially accumulated alongside imprints, suggesting this was an artifact of membrane deformation. In extreme cases, the membranes even developed microcracks. Inorganic scaling and (bio)organic fouling were low, which was attributed to effective pretreatment and judicious UHPRO operation. Aluminosilicates were the dominant inorganic scale, and iodine was evenly distributed across the membrane surfaces. Low amounts of chromium, calcium, magnesium, barium, and iron were heterogeneously deposited across the membranes. Results pointed to the need to develop novel spacers and membrane polymers and to update concentration polarization models, accounting for potential flow heterogeneities introduced by embossment.
Förderung
- Division of Chemical, Bioengineering, Environmental, and Transport Systems
Zitieren
APA
Shealy, K., Joag, S., Zhang, G., Henthorne, L., Casas, J., Castaneda, H., & Chellam, S. (2026). Dual Embossment Modes During Pilot-Scale Ultra-High Pressure Reverse Osmosis of Hypersaline Oilfield-Produced Water: Preferential Scalant Accumulation Along Imprints of Intruded Permeate Spacers. ACS ES&T Engineering, 6(11), 3248-3261. https://doi.org/10.1021/acsestengg.6c00635
Vancouver
Shealy K, Joag S, Zhang G, Henthorne L, Casas J, Castaneda H, et al. Dual Embossment Modes During Pilot-Scale Ultra-High Pressure Reverse Osmosis of Hypersaline Oilfield-Produced Water: Preferential Scalant Accumulation Along Imprints of Intruded Permeate Spacers. ACS ES&T Engineering. 2026;6(11):3248-3261. doi:10.1021/acsestengg.6c00635
BibTeX
@article{Shealy2026,
author = {Shealy, Kaiya and Joag, Sanket and Zhang, Guorui and Henthorne, Lisa and Casas, Javier and Castaneda, Homero and Chellam, Shankararaman},
title = {Dual Embossment Modes During Pilot-Scale Ultra-High Pressure Reverse Osmosis of Hypersaline Oilfield-Produced Water: Preferential Scalant Accumulation Along Imprints of Intruded Permeate Spacers},
journal = {ACS ES&T Engineering},
year = {2026},
volume = {6},
number = {11},
pages = {3248--3261},
doi = {10.1021/acsestengg.6c00635}
}
EUVIMED