EUVIMEDEUVIMED entdecken
Crossref

Voltage-Switchable Phosphate Recovery Using Magnetite-Coated Electrodes in Hybrid Capacitive Deionization

Kelly E. Matuszewski, Elias M. Kallon, Lauren Valentino, Vinayak P. Dravid

ACS ES&T Engineering · 18.11.2026

DOI: 10.1021/acsestengg.6c00609 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS ES&T Engineering, online erschienen am 18.11.2026. Verfasst von Kelly E. Matuszewski und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Innovation and Technology Ecosystems, Division of Translational Impacts, Trienens Institute for Sustainability and Energy, Northwestern University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Phosphate runoff from agriculture and municipal wastewater drives eutrophication, while the finite, nonrenewable nature of phosphate rock motivates technologies that recover this critical mineral. However, phosphate recovery is often limited by chemical-intensive precipitation or sorbent regeneration methods, including bulk pH adjustments for desorption, which increase handling complexity. Here, we demonstrate voltage-switchable capture and release of phosphate using magnetite-coated carbon cloth (Fe3O4@CC) as a faradaic electrode in an asymmetric flow-by hybrid capacitive deionization (H-CDI) cell. Applying +1.2 V increased phosphate capacity by an average of 2.6× relative to 0 V conditions across the pH range tested (5.5–7.5). Then, an applied voltage of −1.2 V triggered phosphate desorption and recovery without the addition of chemical regenerants at environmentally relevant phosphorus concentrations of 1–10 mg L–1. Systematic evaluation of initial pH, phosphorus concentration, and flow rate (1–7 mL/min) revealed that residence time is the dominant operational parameter. Real-time, in-line pH monitoring, cyclic voltammetry, and postcycling X-ray photoelectron spectroscopy support a proton-coupled Fe2+/Fe3+ redox mechanism in which the applied voltage modulates the surface protonation to drive reversible phosphate chemisorption, all without the addition of chemical regenerants. These findings provide mechanistic insight into faradaic H-CDI electrodes targeting selective nutrient recovery from wastewater.

Förderung

  • Innovation and Technology Ecosystems
  • Division of Translational Impacts
  • Trienens Institute for Sustainability and Energy, Northwestern University

Zitieren

APA

Matuszewski, K. E., Kallon, E. M., Valentino, L., & Dravid, V. P. (2026). Voltage-Switchable Phosphate Recovery Using Magnetite-Coated Electrodes in Hybrid Capacitive Deionization. ACS ES&T Engineering. https://doi.org/10.1021/acsestengg.6c00609

Vancouver

Matuszewski KE, Kallon EM, Valentino L, Dravid VP. Voltage-Switchable Phosphate Recovery Using Magnetite-Coated Electrodes in Hybrid Capacitive Deionization. ACS ES&T Engineering. 2026. doi:10.1021/acsestengg.6c00609

BibTeX
@article{Matuszewski2026,
  author = {Matuszewski, Kelly E. and Kallon, Elias M. and Valentino, Lauren and Dravid, Vinayak P.},
  title = {Voltage-Switchable Phosphate Recovery Using Magnetite-Coated Electrodes in Hybrid Capacitive Deionization},
  journal = {ACS ES&T Engineering},
  year = {2026},
  doi = {10.1021/acsestengg.6c00609}
}
Kostenlos starten →