Membranes for Lithium Recovery From Conventional and Unconventional Sources
ACS ES&T Engineering · 08.05.2026 · 6 (5) · 1402-1426
DOI: 10.1021/acsestengg.5c00997 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift ACS ES&T Engineering, online erschienen am 07.04.2026. Verfasst von Nurshaun Sreedhar und 8 weiteren Autor:innen. Beteiligte Einrichtung: Maseeh Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin, Austin, Texas 78712, United States. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 180 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Renewable Energy Laboratory.
Abstract (Originalsprache)
Lithium has been deemed a critical mineral of national importance that finds uses in a wide range of applications, and its demand has been rising significantly in recent years. The urgency of meeting this demand requires lithium extraction from various aqueous sources such as continental brines, geothermal brines, seawater, produced water, and battery waste. While direct lithium extraction (DLE) technologies such as adsorption, ion exchange, and solvent extraction have emerged as possible solutions, membrane technologies are also being investigated for various sources and at different stages of the recovery process. Here, we analyze the application of membranes for pretreatment of lithium source waters, bring management, lithium/magnesium separation, lithium/sodium separation, and lithium hydroxide conversion, and evaluate performance metrics for critical lithium separations from the literature. We explore the potential of membranes at every stage of the recovery process and describe their current status and future prospects. We describe hypothetical process trains with integrated membrane technologies for each source type and address their feasibility and challenges. The potential energy and water impacts of membrane-integrated and conventional DLE processes are also critically considered alongside performance and selectivity metrics, and this is illustrated using examples and calculated from published technical reports. This paper thus provides a comprehensive overview of the application of membranes along every stage of the lithium recovery process, emphasizing the versatility and potential of membrane technologies for critical mineral recovery.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Maseeh Department of Civil, Architectural and Environmental Engineering, The University of Texas at Austin, Austin, Texas 78712, United States.
- National Laboratory of the Rockies, Golden, Colorado 80401, United States.
- McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas 78712, United States.
ORCID-Profile: Nurshaun Sreedhar, Gary Grim, Manish Kumar, Abhishek Roy
Förderung
- National Renewable Energy Laboratory
Zitieren
APA
Sreedhar, N., Lee, R., Appukuttan, S., Sitaraman, H., DesVeaux, J., Grim, G., Paul, M., Kumar, M., & Roy, A. (2026). Membranes for Lithium Recovery From Conventional and Unconventional Sources. ACS ES&T Engineering, 6(5), 1402-1426. https://doi.org/10.1021/acsestengg.5c00997
Vancouver
Sreedhar N, Lee R, Appukuttan S, Sitaraman H, DesVeaux J, Grim G, et al. Membranes for Lithium Recovery From Conventional and Unconventional Sources. ACS ES&T Engineering. 2026;6(5):1402-1426. doi:10.1021/acsestengg.5c00997
BibTeX
@article{Sreedhar2026,
author = {Sreedhar, Nurshaun and Lee, Rebecca and Appukuttan, Sreejith and Sitaraman, Hariswaran and DesVeaux, Jason and Grim, Gary and Paul, Mou and Kumar, Manish and Roy, Abhishek},
title = {Membranes for Lithium Recovery From Conventional and Unconventional Sources},
journal = {ACS ES&T Engineering},
year = {2026},
volume = {6},
number = {5},
pages = {1402--1426},
doi = {10.1021/acsestengg.5c00997}
}
EUVIMED