EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flash-Infrared-Annealing-Enabled High-Temperature Sintering of Photoanodes on Flexible Polymer Foils for Ultralight Photovoltaics

David Bradford, Iacopo Benesperi iD, Hiroaki Jinno, Naveen Bhati iD, Roberto Avilés-Betanzos iD, François Maréchal, Gerko Oskam, Chih-Jen Shih iD, Michael Grätzel iD, Sandy Sánchez iD, Kevin Sivula iD, Marina Freitag iD

ACS Energy Letters · 09.01.2026 · 11 (1) · 699-706

DOI: 10.1021/acsenergylett.5c03389 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Energy Letters, online erschienen am 16.12.2025. Verfasst von David Bradford und 11 weiteren Autor:innen. Beteiligte Einrichtung: Newcastle University, School of Natural and Environmental Sciences, Bedson Building, Newcastle upon Tyne NE1 7RU, U.K. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Royal Society, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung, HORIZON EUROPE Marie Sklodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Resolution Image Download MS PowerPoint Slide Ultralight photovoltaics are indispensable wherever every gram counts, from self-powered Internet of Things nodes to free-hanging greenhouse covers. In dye-sensitized solar cells (DSCs) the required 450–500 °C sintering of the mesoporous TiO 2 (m-TiO 2 ) photoanode has so far limited the use of polymer substrates. Here, we replace the furnace step with flash infrared annealing. Near-IR radiation heats the 3.5 μm m-TiO 2 layer to 550 ± 20 °C while keeping a 12.5 μm indium-tin-oxide/polyimide foil below 170 °C with a water-cooled heat-sink. We obtain complete removal of organic binders, while the substrate sheet resistance increases modestly from 60.2 to 129.8 Ω sq –1 . Flexible DSCs reach power conversion efficiencies of 5.10% under AM 1.5G illumination, a record value for DSCs on sub-25 μm plastics. The finished devices deliver 51× the specific power of equivalent glass devices. A cradle-to-gate life cycle assessment normalized to power-per-mass reveals order-of-magnitude reductions in several categories compared with rigid hot-plate processing. Localized IR sintering thus removes the last processing barrier for truly roll-to-roll printable hybrid solar cells.

Autor:innen und Institutionen

  • Newcastle University, School of Natural and Environmental Sciences, Bedson Building, Newcastle upon Tyne NE1 7RU, U.K.
  • University of Turin, Department of Chemistry, NIS Interdepartmental Centre and INSTM Reference Centre, Via Quarello 15/A, 10135 Torino (TO), Italy.
  • ETH Zürich, Institute for Chemical and Bioengineering, 8093 Zürich, Switzerland.
  • École Polytechnique Fédérale de Lausanne, Industrial Process and Energy Systems Engineering, 1951 Sion, Switzerland.
  • Instituto Politécnico Nacional, Departamento de Física Aplicada, Centro de Investigación y de Estudios Avanzados, Merida 97310, Yucatan, Mexico.
  • Center for Nanoscience and Sustainable Technologies (CNATS), Departamento de Sistemas Físicos, Químicos y Naturales, Universidad Pablo de Olavide, 41013 Sevilla, Spain.

ORCID-Profile: Iacopo Benesperi, Naveen Bhati, Roberto Avilés-Betanzos, Chih-Jen Shih, Michael Grätzel, Sandy Sánchez, Kevin Sivula, Marina Freitag

Förderung

  • Royal Society
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • HORIZON EUROPE Marie Sklodowska-Curie Actions
  • Ministero dell'Università e della Ricerca
  • Biotechnology and Biological Sciences Research Council

Zitieren

APA

Bradford, D., Benesperi, I., Jinno, H., Bhati, N., Avilés-Betanzos, R., Maréchal, F., Oskam, G., Shih, C. J., Grätzel, M., Sánchez, S., Sivula, K., & Freitag, M. (2026). Flash-Infrared-Annealing-Enabled High-Temperature Sintering of Photoanodes on Flexible Polymer Foils for Ultralight Photovoltaics. ACS Energy Letters, 11(1), 699-706. https://doi.org/10.1021/acsenergylett.5c03389

Vancouver

Bradford D, Benesperi I, Jinno H, Bhati N, Avilés-Betanzos R, Maréchal F, et al. Flash-Infrared-Annealing-Enabled High-Temperature Sintering of Photoanodes on Flexible Polymer Foils for Ultralight Photovoltaics. ACS Energy Letters. 2026;11(1):699-706. doi:10.1021/acsenergylett.5c03389

BibTeX
@article{Bradford2026,
  author = {Bradford, David and Benesperi, Iacopo and Jinno, Hiroaki and Bhati, Naveen and Avilés-Betanzos, Roberto and Maréchal, François and Oskam, Gerko and Shih, Chih-Jen and Grätzel, Michael and Sánchez, Sandy and Sivula, Kevin and Freitag, Marina},
  title = {Flash-Infrared-Annealing-Enabled High-Temperature Sintering of Photoanodes on Flexible Polymer Foils for Ultralight Photovoltaics},
  journal = {ACS Energy Letters},
  year = {2026},
  volume = {11},
  number = {1},
  pages = {699--706},
  doi = {10.1021/acsenergylett.5c03389}
}
Kostenlos starten →