Investigation of the SMSI Effect on Hydrogen Oxidation Selectivity by Rotating Disk and Floating Gold Electrodes
ACS Electrochemistry · 05.11.2026 · 2 (11) · 2776-2792
DOI: 10.1021/acselectrochem.6c00345 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Electrochemistry, online erschienen am 05.10.2026. Verfasst von Almina Sharaeva und 9 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: Région Occitanie Pyrénées-Méditerranée, Johnson Matthey.
Abstract (Originalsprache)
Degradation of proton exchange membrane fuel cells (PEMFCs) due to start-up/shut-down events, fuel starvation, and catalyst poisoning shortens their lifetime. These degradation mechanisms can be mitigated by developing selective catalysts for the hydrogen oxidation reaction. In this study, we developed a hydrogen oxidation reaction (HOR)-selective Pt/TiO2 catalyst with catalytic properties modified by strong metal–support interaction (SMSI). Scanning transmission electron microscopy showed the presence of a thin TiOx overlayer on the surface of Pt nanoparticles, while X-ray photoelectron spectroscopy showed a negative shift of the Pt4f binding energy. The electrocatalytic properties toward HOR and the oxygen reduction reaction (ORR) were investigated using both a rotating disk electrode (RDE) and a faster mass-transport technique, namely, the floating gold electrode (FGE). Specifically, the FGE measurements allowed us measuring the HOR activity of Pt/TiO2 and Pt/C at relevant current densities and without strong diffusion limitations, which is not possible with RDE. The FGE measurements demonstrated that the HOR activity of Pt/TiO2 was retained up to 1.5 V vs RHE, which is attributed to the SMSI effect. They also revealed lower ORR and HOR mass-specific activities of Pt/TiO2 compared to Pt/C. Nevertheless, SMSI affects more the ORR than HOR, leading to elevated selectivity of Pt/TiO2 vs Pt/C. Below ca. 1000 mA cm–2 on the polarization curve, a PEMFC comprising a Pt//TiO2 anode and a Pt/C cathode showed comparable performance loss after 100 start-up/shut-down cycles than a cell comprising a Pt//C anode and a Pt/C cathode. Above ca. 1000 mA cm–2, a cell comprising a Pt/TiO2 anode and a Pt/C cathode showed improved performance after 100 start-up/shut-down cycles, while a cell comprising a Pt/C anode and a Pt/C cathode showed a slight decay in this region.
Förderung
- Région Occitanie Pyrénées-Méditerranée
- Johnson Matthey
Zitieren
APA
Sharaeva, A., Murawski, J., Tran, T. D., Lecoeur, F., Dupont, M., Donzel, N., Jones, D., Bonastre, A. M., Petrucco, E., & Jaouen, F. (2026). Investigation of the SMSI Effect on Hydrogen Oxidation Selectivity by Rotating Disk and Floating Gold Electrodes. ACS Electrochemistry, 2(11), 2776-2792. https://doi.org/10.1021/acselectrochem.6c00345
Vancouver
Sharaeva A, Murawski J, Tran TD, Lecoeur F, Dupont M, Donzel N, et al. Investigation of the SMSI Effect on Hydrogen Oxidation Selectivity by Rotating Disk and Floating Gold Electrodes. ACS Electrochemistry. 2026;2(11):2776-2792. doi:10.1021/acselectrochem.6c00345
BibTeX
@article{Sharaeva2026,
author = {Sharaeva, Almina and Murawski, James and Tran, Trung Dung and Lecoeur, Frédéric and Dupont, Marc and Donzel, Nicolas and Jones, Deborah and Bonastre, Alex Martinez and Petrucco, Enrico and Jaouen, Frédéric},
title = {Investigation of the SMSI Effect on Hydrogen Oxidation Selectivity by Rotating Disk and Floating Gold Electrodes},
journal = {ACS Electrochemistry},
year = {2026},
volume = {2},
number = {11},
pages = {2776--2792},
doi = {10.1021/acselectrochem.6c00345}
}
EUVIMED