Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition
ACS Electrochemistry · 05.06.2025 · 1 (6) · 897-909
DOI: 10.1021/acselectrochem.4c00207 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Electrochemistry, online erschienen am 07.02.2025. Verfasst von Melissa E Kreider und 8 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hydrogen and Fuel Cell Technologies Office.
Abstract (Originalsprache)
Anion exchange membrane water electrolysis (AEMWE) is an emerging technology for the low-cost production of hydrogen. However, the efficiency and durability of AEMWE devices is currently insufficient to compete with other low-temperature electrolysis technologies. The porous transport layer (PTL) is a critical cell component that remains relatively unoptimized for AEMWE. In this study, we demonstrate that device performance is significantly affected by the morphology and composition of the PTL. For Ni fiber-based PTLs with a ∼2 μm Co3O4 oxygen evolution reaction catalyst layer, decreasing the pore size and porosity resulted in a 20% increase in current density at 2 V in 1 M KOH supporting electrolyte. Alloy PTLs with even lower porosity had a higher performance; in particular, the stainless steel PTL gave an 80% increase in current density relative to Ni. Without Co3O4, the alloy PTLs still demonstrated high activity, indicating that the PTL material was catalytically active. However, characterization of the electrode and electrolyte after testing indicated that the alloy PTLs also underwent restructuring and corrosion processes that may limit long-term stability. This study demonstrates that the design of PTLs with improved morphology and composition is an important area of focus to achieve AEMWE performance targets.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golden, Colorado 80401, United States.
- Department of Chemistry, University of Puerto Rico - Rio Piedras, San Juan, Puerto Rico 00931, United States.
- Sandia National Laboratories, Livermore, California 94551, United States.
- Chemical Sciences and Engineering Division, Argonne National Laboratory, Lemont, Illinois 60439, United States.
- Advanced Energy Systems Graduate Program, Colorado School of Mines, Golden, Colorado 80401, United States.
ORCID-Profile: Melissa E Kreider, Arielle L Clauser, Matthew E Sweers, Emily K Volk, Shaun M Alia
Förderung
- Hydrogen and Fuel Cell Technologies Office
Zitieren
APA
Kreider, M. E., Maldonado Santos, A. R., Clauser, A. L., Sweers, M. E., Hu, L., Volk, E. K., Chan, A. L., Sugar, J. D., & Alia, S. M. (2025). Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition. ACS Electrochemistry, 1(6), 897-909. https://doi.org/10.1021/acselectrochem.4c00207
Vancouver
Kreider ME, Maldonado Santos AR, Clauser AL, Sweers ME, Hu L, Volk EK, et al. Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition. ACS Electrochemistry. 2025;1(6):897-909. doi:10.1021/acselectrochem.4c00207
BibTeX
@article{Kreider2025,
author = {Kreider, Melissa E and Maldonado Santos, Ambar R and Clauser, Arielle L and Sweers, Matthew E and Hu, Leiming and Volk, Emily K and Chan, Ai-Lin and Sugar, Joshua D and Alia, Shaun M},
title = {Porous Transport Layers for Anion Exchange Membrane Water Electrolysis: The Impact of Morphology and Composition},
journal = {ACS Electrochemistry},
year = {2025},
volume = {1},
number = {6},
pages = {897--909},
doi = {10.1021/acselectrochem.4c00207}
}
EUVIMED