Identification of Metal–Organic Frameworks for near Practical Energy Limit CO 2 Capture from Wet Flue Gases: An Integrated Atomistic and Process Simulation Screening of Experimental MOFs
ACS Central Science · 27.08.2025 · 11 (8) · 1438-1451
DOI: 10.1021/acscentsci.5c00777 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Central Science, online erschienen am 07.07.2025. Verfasst von Ohmin Kwon und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Biomolecular Sciences, University of Ottawa, 10 Marie Curie Private, Ottawa, Ontario K1N 6N5, Canada. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Ottawa, Total, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Metal-organic framework (MOF) materials have attracted significant attention as solid sorbents for low energy CO2 capture with adsorption-based gas separation processes. In this work, an integrated screening workflow combining a series of atomistic and process simulations was applied to identify promising MOFs for a 4-step pressure-vacuum swing adsorption (P/VSA) process at three different CO2 flue gas compositions (6%, 15% and 35%). Starting from 55,818 unique experimentally characterized MOFs, ∼19k porous MOFs were investigated via atomistic grand canonical Monte Carlo (GCMC) simulations and machine learning model-based process optimizations to accelerate the screening of a large candidate database. Thousands of MOFs were identified for each of the CO2 compositions tested that could achieve within 4% of the practical energy limit of dry CO2 capture for the P/VSA process while still meeting the 95% CO2 purity and 90% recovery constraints. From this pool, 3D MOFs without open metal sites were subjected to the multicomponent (CO2/N2/H2O) GCMC simulations at 40% relative humidity. Based on these simulations, hundreds of MOFs were identified at each CO2 composition that could retain 90% of their CO2 capture at this humidity while also adsorbing a minimal amount of water. A geometric analysis of these high performing materials revealed that narrow, straight 1D-channels were a common structural motif for low energy wet flue gas CO2 capture with P/VSA.
Autor:innen und Institutionen
- Department of Chemistry and Biomolecular Sciences, University of Ottawa, 10 Marie Curie Private, Ottawa, Ontario K1N 6N5, Canada.
- Department of Chemical and Materials Engineering, University of Alberta, 12th floor, Donadeo Innovation Centre for Engineering (ICE), 9211-116 Street, Edmonton, Alberta T6G1H9, Canada.
ORCID-Profile: Ohmin Kwon, Marco Gibaldi, Kasturi Nagesh Pai, Arvind Rajendran, Tom K Woo
Förderung
- University of Ottawa
- Total
- Natural Sciences and Engineering Research Council of Canada
- Mitacs
Zitieren
APA
Kwon, O., Gibaldi, M., Pai, K. N., Rajendran, A., & Woo, T. K. (2025). Identification of Metal–Organic Frameworks for near Practical Energy Limit CO 2 Capture from Wet Flue Gases: An Integrated Atomistic and Process Simulation Screening of Experimental MOFs. ACS Central Science, 11(8), 1438-1451. https://doi.org/10.1021/acscentsci.5c00777
Vancouver
Kwon O, Gibaldi M, Pai KN, Rajendran A, Woo TK. Identification of Metal–Organic Frameworks for near Practical Energy Limit CO 2 Capture from Wet Flue Gases: An Integrated Atomistic and Process Simulation Screening of Experimental MOFs. ACS Central Science. 2025;11(8):1438-1451. doi:10.1021/acscentsci.5c00777
BibTeX
@article{Kwon2025,
author = {Kwon, Ohmin and Gibaldi, Marco and Pai, Kasturi Nagesh and Rajendran, Arvind and Woo, Tom K},
title = {Identification of Metal–Organic Frameworks for near Practical Energy Limit CO 2 Capture from Wet Flue Gases: An Integrated Atomistic and Process Simulation Screening of Experimental MOFs},
journal = {ACS Central Science},
year = {2025},
volume = {11},
number = {8},
pages = {1438--1451},
doi = {10.1021/acscentsci.5c00777}
}
EUVIMED