Highly Efficient Hydrogenation of CO2-Containing Syngas to Liquid Fuels over FeMnK Catalysts
ACS Catalysis · 21.08.2026 · 16 (16) · 16362-16379
DOI: 10.1021/acscatal.6c04989 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Catalysis, online erschienen am 11.08.2026. Verfasst von Bohui Ye und 10 weiteren Autor:innen. Die Arbeit nennt 72 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Converting CO2-containing syngas directly to liquid fuels provides an effective route for carbon-efficient fuel production. However, it is challenging to achieve the simultaneous conversion of CO and CO2 into liquid fuels due to the different activation pathways. Herein, a series of Mn- and K-promoted FeMnxKy catalysts were fabricated for the direct conversion of CO2-containing syngas into C5+ hydrocarbons. The optimal FeMn1K1 catalyst achieves 61.8% CO conversion with 73.2% C5+ hydrocarbon selectivity, including 50.9% C8−C16 hydrocarbon selectivity, corresponding to C5+ and C8−C16 hydrocarbon yields of 37.0% and 25.7%, respectively, under the reaction conditions of 320 °C, 2.0 MPa, 5100 mL gcat−1 h−1, and a H2/CO/CO2 ratio of 51/26/8, along with long-term stability for over 1000 h, demonstrating its promising industrial application. Spectroscopic characterizations of the spent FeMnK catalysts revealed that the high catalytic performance derives from a well-defined phase composition involving in situ formed ε-Fe2C, χ-Fe5C2, and Fe3O4 species. An optimal Mn content achieves a balanced phase composition among ε-Fe2C, χ-Fe5C2, and Fe3O4, whereas excessive Mn shifts the balance toward Fe3O4. K acts as an electronic promoter that enhances CO dissociation and suppresses olefin overhydrogenation, but excessive K promotes the oxidation of χ-Fe5C2 to Fe3O4. Mechanistic studies using H2/D2 isotope exchange, C3H6 and CO pulse hydrogenation, and operando diffuse reflectance infrared Fourier transform spectroscopy further elucidated the reaction pathway. The coexistence of ε-Fe2C, χ-Fe5C2, and Fe3O4 maximizes carbon utilization and provides a cost-effective, scalable route for liquid fuel production from CO2-containing syngas.
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Ye, B., Zhang, J., Pan, M., Pang, Z., Han, J., Yang, L., Zhao, W., Bu, X., Li, J., Wang, H., & Gao, P. (2026). Highly Efficient Hydrogenation of CO2-Containing Syngas to Liquid Fuels over FeMnK Catalysts. ACS Catalysis, 16(16), 16362-16379. https://doi.org/10.1021/acscatal.6c04989
Vancouver
Ye B, Zhang J, Pan M, Pang Z, Han J, Yang L, et al. Highly Efficient Hydrogenation of CO2-Containing Syngas to Liquid Fuels over FeMnK Catalysts. ACS Catalysis. 2026;16(16):16362-16379. doi:10.1021/acscatal.6c04989
BibTeX
@article{Ye2026,
author = {Ye, Bohui and Zhang, Jian and Pan, Mingjun and Pang, Zhanfei and Han, Jian and Yang, Liping and Zhao, Wenyue and Bu, Xianni and Li, Jiong and Wang, Hao and Gao, Peng},
title = {Highly Efficient Hydrogenation of CO2-Containing Syngas to Liquid Fuels over FeMnK Catalysts},
journal = {ACS Catalysis},
year = {2026},
volume = {16},
number = {16},
pages = {16362--16379},
doi = {10.1021/acscatal.6c04989}
}
EUVIMED