Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites
ACS Catalysis · 07.08.2026 · 16 (15) · 15322-15336
DOI: 10.1021/acscatal.6c04524 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Catalysis, online erschienen am 23.07.2026. Verfasst von Cole W. Hullfish und 10 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Princeton Center for Complex Materials, National Science Foundation Graduate Research Fellowship Program, Basic Energy Sciences.
Abstract (Originalsprache)
Brønsted (BAS), Lewis (LAS), and surface Brønsted (SBAS) acid sites have been investigated for polyethylene (PE) upcycling by zeolite catalysts, but there is no clear consensus regarding their catalytic roles, partly due to the complexity of the catalysts used and varying reaction conditions across studies. This work systematically determined how these sites impact PE conversion rates and product distributions by utilizing a suite of microporous MFI catalysts with varying Si/Al ratios, acid site densities, and inherent mesoporosities. PE conversion rates did not trend with total BAS or LAS densities due to a combination of internal mass transfer limitation and the apparent inability of LAS alone to cleave C–C bonds, but a strong, statistically significant correlation was present with respect to SBAS density and mesopore surface area, jointly, owing to accelerated polymer activation on external surfaces to smaller diffusion-limited chains. However, ingress of these SBAS-derived fragments ultimately remained rate limiting, as demonstrated by solid conversion rates that increased with mesopore surface area at similar SBAS density and likewise increased with SBAS density at similar mesopore surface area. In batch PE cracking reactions, light gaseous product selectivities were most sensitive to total BAS, with higher densities generally exhibiting higher selectivity to C3 and linear C4–C7 products and higher alkane/alkene product ratios, consistent with increased β-scission turnovers. Insights from this work help systematically clarify the roles of BAS, LAS, SBAS, and mesopores in PE cracking reactions and inform the development of tailored zeolite catalysts for efficient polyolefin upcycling.
Förderung
- Princeton Center for Complex Materials
- National Science Foundation Graduate Research Fellowship Program
- Basic Energy Sciences
- Quad Fellowship
- Andlinger Center for Energy and the Environment, Princeton University
- U.S. Department of Energy
- National Science Foundation
Zitieren
APA
Hullfish, C. W., Tan, J. Z., Piorkowski, J. V., Repins, C. J., Bhowmick, A., Oh, M. J., Ganza, D. R., Arumuganainar, S. E., Liu, D., Koel, B. E., & Sarazen, M. L. (2026). Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites. ACS Catalysis, 16(15), 15322-15336. https://doi.org/10.1021/acscatal.6c04524
Vancouver
Hullfish CW, Tan JZ, Piorkowski JV, Repins CJ, Bhowmick A, Oh MJ, et al. Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites. ACS Catalysis. 2026;16(15):15322-15336. doi:10.1021/acscatal.6c04524
BibTeX
@article{Hullfish2026,
author = {Hullfish, Cole W. and Tan, Jun Zhi and Piorkowski, John V. and Repins, Carson J. and Bhowmick, Antara and Oh, Matthew J. and Ganza, Darius Rudasingwa and Arumuganainar, Sonia E. and Liu, Dongxia and Koel, Bruce E. and Sarazen, Michele L.},
title = {Impact of Site Identity, Location, and Accessibility on Polyethylene Conversion Rates and Product Selectivities over Metal-Free MFI Zeolites},
journal = {ACS Catalysis},
year = {2026},
volume = {16},
number = {15},
pages = {15322--15336},
doi = {10.1021/acscatal.6c04524}
}
EUVIMED