EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Fully Biological Gas-Exchange Membrane toward a Biofabricated, Booster Lung

Erica M Comber iD, Kalliope G Roberts, Isabel M Joyce, Rachelle N Palchesko, Daniel J Shiwarksi iD, Xi Ren, Adam W Feinberg iD, Keith E Cook iD

ACS Biomaterials Science & Engineering · 2026

DOI: 10.1021/acsbiomaterials.6c00046 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2026. Verfasst von Erica M Comber und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, United States of America. Hauptthemen laut MEDLINE: Lung, Membranes, Artificial. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation Graduate Research Fellowship Program, National Heart, Lung, and Blood Institute, Carnegie Mellon University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A means of long-term respiratory support is needed for the nearly one million chronic lung disease patients hospitalized annually. Extracorporeal membrane oxygenation can support patients for months, but clot formation within oxygenators and bleeding complications make it infeasible for permanent support. An endothelial cell coating on these devices could leverage cells' ability to reduce clot initiation and propagation, but long-term binding to artificial materials has not been achieved. The goal of these studies was to engineer a preliminary, fully biological tissue that mimics the alveolar-capillary barrier and could function as the gas-exchange membrane of an implantable, biofabricated support lung for years. High-concentration, type I collagen membranes were made to be 18.8 ± 3.6 μm-thick and characterized in terms of mechanical strength, water permeability, and oxygen transfer under static, air-liquid conditions. The membranes were cocultured with human umbilical vein endothelial cells (HUVECs) and A549 lung epithelial cells on opposing sides to evaluate tissue viability in air-liquid conditions and permeability to the albumin mimic, 70 kDa-FITC dextran. The 18.8 ± 3.6 μm-thick acellular collagen I hydrogel withstood ≥120 mmHg and transferred 2.16 ± 0.5 μL/cm2/mmHg/h of plasma. It was oxygen permeable and produced 75% of the gas transfer of a 51 μm, implantable, silicone sheet. Cell cocultures remained viable in air-liquid conditions, and dextran permeability emphasized the need to include an alveolar epithelium to improve barrier function. Lastly, the method was expanded into casting a parallel-plate, perfusable channel as the functional, representative element of a booster lung. The channel provided a 16.8 ± 3.4 μm diffusion distance across 4 cm2 of surface area and maintained an air-liquid interface. Future work should examine cross-linking the collagen I for equally strong but thinner membranes (≤10 μm), transition to induced pluripotent stem cell cultures, and implement multichannel casting to increase the surface area needed for a biofabricated, intracorporeal, support lung.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LungMembranes, ArtificialHumansCollagen Type IHuman Umbilical Vein Endothelial CellsA549 CellsTissue EngineeringPermeabilityOxygenPulmonary Gas ExchangeHydrogels

Stichwörter der Autor:innen

artificial lungbiofabricationbooster lungcollagen Igas exchangetissue engineering

Substanzen

Membranes, ArtificialCollagen Type IOxygenHydrogels

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, United States of America.
  • Department of Bioengineering, University of Pittsburgh, Pittsburgh, Pennsylvania 15213, United States of America.
  • Department of Materials Science & Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213, United States of America.

ORCID-Profile: Erica M Comber, Daniel J Shiwarksi, Adam W Feinberg, Keith E Cook

Förderung

  • National Science Foundation Graduate Research Fellowship Program
  • National Heart, Lung, and Blood Institute
  • Carnegie Mellon University

Zitieren

APA

Comber, E. M., Roberts, K. G., Joyce, I. M., Palchesko, R. N., Shiwarksi, D. J., Ren, X., Feinberg, A. W., & Cook, K. E. (2026). A Fully Biological Gas-Exchange Membrane toward a Biofabricated, Booster Lung. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.6c00046

Vancouver

Comber EM, Roberts KG, Joyce IM, Palchesko RN, Shiwarksi DJ, Ren X, et al. A Fully Biological Gas-Exchange Membrane toward a Biofabricated, Booster Lung. ACS Biomaterials Science & Engineering. 2026. doi:10.1021/acsbiomaterials.6c00046

BibTeX
@article{Comber2026,
  author = {Comber, Erica M and Roberts, Kalliope G and Joyce, Isabel M and Palchesko, Rachelle N and Shiwarksi, Daniel J and Ren, Xi and Feinberg, Adam W and Cook, Keith E},
  title = {A Fully Biological Gas-Exchange Membrane toward a Biofabricated, Booster Lung},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2026},
  doi = {10.1021/acsbiomaterials.6c00046}
}
Kostenlos starten →