A Versatile Droplet Microfluidic Platform Capable of Confining Preformed Spheroids in Hydrogel Microenvironments for Downstream Growth and Analysis
ACS Biomaterials Science & Engineering · 13.10.2025 · 11 (10) · 6248-6261
DOI: 10.1021/acsbiomaterials.5c01015 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, online erschienen am 08.09.2025. Verfasst von Noura Ezzo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada. Hauptthemen laut MEDLINE: Spheroids, Cellular, Hydrogels, Microfluidics, Lab-On-A-Chip Devices. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: Government of Canada, Canada Foundation for Innovation, Canada Research Chairs.
Abstract (Originalsprache)
Patient-derived tumor organoids (PDTOs) are promising 3D disease models for developing personalized treatment methods. However, conventional technologies for making PDTOs have limitations such as batch-to-batch variation and low throughput. Droplet microfluidics (DM), which utilizes uniform droplets generated in microchannels, has demonstrated potential for creating organoids due to its high-throughput and controllable parameters. However, most existing DM devices require a high initial cell count, on the order of 10,6 which is difficult to acquire with biopsy samples. A novel step-stone strategy is to encapsulate preformed spheroids in hydrogel droplets, creating a microenvironment supporting their future growth into organoids or for immediate analysis. While a similar strategy has been reported, the viability and uniformity of spheroids after encapsulation, which are important for continuous growth into organoids, were not examined. We present a DM device featuring a double-cross geometry chip to encapsulate preformed spheroids into hydrogel microparticles (HMPs) with a very low initial cell count (order of 104) and ensuring high viability and uniformity of the spheroids in the recovered cross-linked HMPs. The preformed spheroids, 100–200 μm in diameter, were successfully encapsulated in well-defined HMPs. With contrasting viscosity hydrogels, a hydrodynamic focusing stream was created to leverage spheroids into their own droplets. Preformed spheroid encapsulation efficiency was affected by the width of the focusing stream and the quantity of spheroids at the inlet, with the best results reaching about 75% total encapsulation and 54% single spheroid encapsulation. Spheroid-laden HMPs were collected and cross-linked off-chip, where spheroids could continue to grow. The encapsulated spheroids maintained above 80% viability over 5 days of culture and retained uniformity with less than a 4% difference in diameter variation compared to pre-encapsulated spheroids. Ultimately, we demonstrated that preformed spheroid encapsulation using DM was a robust way to encapsulate a low sample size while maintaining viability and uniformity.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Chemical Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada.
- Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ontario N2L 3G1, Canada.
ORCID-Profile: Noura Ezzo, Carolyn L Ren, Evelyn K F Yim
Förderung
- Government of Canada
- Canada Foundation for Innovation
- Canada Research Chairs
Zitieren
APA
Ezzo, N., Nguyen, T. H., Ren, C. L., & Yim, E. K. F. (2025). A Versatile Droplet Microfluidic Platform Capable of Confining Preformed Spheroids in Hydrogel Microenvironments for Downstream Growth and Analysis. ACS Biomaterials Science & Engineering, 11(10), 6248-6261. https://doi.org/10.1021/acsbiomaterials.5c01015
Vancouver
Ezzo N, Nguyen TH, Ren CL, Yim EKF. A Versatile Droplet Microfluidic Platform Capable of Confining Preformed Spheroids in Hydrogel Microenvironments for Downstream Growth and Analysis. ACS Biomaterials Science & Engineering. 2025;11(10):6248-6261. doi:10.1021/acsbiomaterials.5c01015
BibTeX
@article{Ezzo2025,
author = {Ezzo, Noura and Nguyen, Thu H and Ren, Carolyn L and Yim, Evelyn K F},
title = {A Versatile Droplet Microfluidic Platform Capable of Confining Preformed Spheroids in Hydrogel Microenvironments for Downstream Growth and Analysis},
journal = {ACS Biomaterials Science & Engineering},
year = {2025},
volume = {11},
number = {10},
pages = {6248--6261},
doi = {10.1021/acsbiomaterials.5c01015}
}
EUVIMED