EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Fabrication of PCL Blended Highly Aligned Nanofiber Yarn from Dual-Nozzle Electrospinning System and Evaluation of the Influence on Introducing Collagen and Tropoelastin

Daxian Zha, Nasif Mahmood, Robert S Kellar, Jessica M Gluck, Martin W King iD

ACS Biomaterials Science & Engineering · 2025

DOI: 10.1021/acsbiomaterials.5c00991 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2025. Verfasst von Daxian Zha und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Textile Engineering, Chemistry and Science, Wilson College of Textiles, North Carolina State University, Raleigh, North Carolina 27606,…. Hauptthemen laut MEDLINE: Nanofibers, Polyesters, Tropoelastin, Collagen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: North Carolina State University, North Carolina Textile Foundation, AATCC Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional electrospinning is a widely used method for creating nanofibrous structures that show promise in skin wound healing. However, the membranes generated through conventional electrospinning techniques lack reproducibility, scalability, and sufficient mechanical strength, ultimately limiting their potential for clinical applications. In this study, we present a new approach for fabricating biomimetic yarn using a dual-nozzle electrospinning system that collects nanofiber yarn from a rotating funnel. Polycaprolactone (PCL) was combined with collagen-I and tropoelastin in the electrospinning solution to provide relevant biochemical cues necessary for human dermal fibroblast (HDF) cells while maintaining structural integrity. The novel yarns exhibited a hierarchical structure akin to collagen fibers forming the dermal layer of the skin. Furthermore, these yarns demonstrated superior mechanical strength compared to conventional electrospun nanofiber webs. Live/dead fluorescence staining and alamarBlue assays revealed that yarns incorporating both collagen-I and tropoelastin supported significantly higher HDF attachment (18.55% at 24 h) and sustained proliferation, increasing 2.93-fold from Day 1 to Day 7, compared to the PCL-only control yarns (9.34% at 24 h; 2.68-fold increase). Scanning electron microscopy (SEM) observations confirmed that cells on protein-containing yarns formed a continuous, smooth cell layer with elongated, spindle-shaped morphology which was aligned along the yarn axis. This highlights the critical role of yarn architecture in guiding cell orientation and organization. The combined biochemical cues from collagen-I and tropoelastin, together with the aligned, twisted yarn architecture, produced scaffolds that not only enhanced cell adhesion and proliferation but also promoted native-like cell alignment and confluence. This synergistic integration of biochemical signaling and structural guidance underscores the potential of these electrospun yarns as advanced dermal scaffolds, offering both mechanical robustness and functional bioactivity for future wound healing and regenerative medicine applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanofibersPolyestersTropoelastinCollagenHumansFibroblastsCell ProliferationTissue ScaffoldsTissue EngineeringCells, CulturedCell Adhesion

Stichwörter der Autor:innen

dermal fibroblastelectrospinningnanofiberskin tissue engineeringwound healingyarn

Substanzen

PolyestersTropoelastinpolycaprolactoneCollagen

Autor:innen und Institutionen

  • Department of Textile Engineering, Chemistry and Science, Wilson College of Textiles, North Carolina State University, Raleigh, North Carolina 27606, United States.
  • Center for Material Interfaces in Research & Applications (MIRA), Northern Arizona University, Flagstaff, Arizona 86011, United States.
  • College of Textiles, Donghua University, Songjiang District, Shanghai 201620, China.

ORCID-Profile: Martin W King

Förderung

  • North Carolina State University
  • North Carolina Textile Foundation
  • AATCC Foundation

Zitieren

APA

Zha, D., Mahmood, N., Kellar, R. S., Gluck, J. M., & King, M. W. (2025). Fabrication of PCL Blended Highly Aligned Nanofiber Yarn from Dual-Nozzle Electrospinning System and Evaluation of the Influence on Introducing Collagen and Tropoelastin. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.5c00991

Vancouver

Zha D, Mahmood N, Kellar RS, Gluck JM, King MW. Fabrication of PCL Blended Highly Aligned Nanofiber Yarn from Dual-Nozzle Electrospinning System and Evaluation of the Influence on Introducing Collagen and Tropoelastin. ACS Biomaterials Science & Engineering. 2025. doi:10.1021/acsbiomaterials.5c00991

BibTeX
@article{Zha2025,
  author = {Zha, Daxian and Mahmood, Nasif and Kellar, Robert S and Gluck, Jessica M and King, Martin W},
  title = {Fabrication of PCL Blended Highly Aligned Nanofiber Yarn from Dual-Nozzle Electrospinning System and Evaluation of the Influence on Introducing Collagen and Tropoelastin},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2025},
  doi = {10.1021/acsbiomaterials.5c00991}
}
Kostenlos starten →