EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pre-Loading of Cells via Vapor Sublimation and the Deposition Polymerization Process with a 3D Porous Scaffold for Cell Cultures

Chung-Ju Chen iD, Chin-Yun Lee, Mei-Yu Chen, Ying-Hsuan Shi, Yu-Chih Chiang iD, Chen-Chi Wu, Hsien-Yeh Chen iD

ACS Biomaterials Science & Engineering · 2025

DOI: 10.1021/acsbiomaterials.5c00439 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2025. Verfasst von Chung-Ju Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan. Hauptthemen laut MEDLINE: Tissue Scaffolds, Polymers, Biocompatible Materials, Cell Culture Techniques. Die Arbeit nennt 123 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we fabricate a three-dimensional (3D) porous poly-p-xylylene scaffold via a preloading technique and tailor it for cell culture. The fabrication process utilizes vapor sublimation and deposition polymerization, which exploits an ice template for sublimation and subsequent deposition of poly-p-xylylene under lower pressure and room temperature conditions. During this process, living cells are incorporated within a protective oil-in-water emulsion system, which facilitates high cell viability, and this construction forms a poly-p-xylylene scaffold with multiscale pores in the scaffold architecture that can be maintained for a tested time frame of 21 days in the current study. This reported fabrication method addresses inherent limitations of traditional methods, such as restricted biocompatibility, the need for modification procedures to achieve adequate porosity, and postseeding/loading of cells. By facilitating precise control over both micro- and nanostructures, the approach simultaneously preloads and accommodates multiple cell types and/or the necessary bioactive factors in the water solution and becomes an ice template. Finally, a single vapor phase fabrication step can lead to the construction of devised multifunctional scaffolds. The resulting scaffolds exhibit high porosity, featuring interconnected pores for cell migration and nutrient diffusion. Furthermore, controlled nanoroughness and microporosity promote cell attachment and enhance cell-cell and cell-matrix interactions, which are critical for tissue integration. Various types of cell cultures alongside diverse lineages of differentiations, including adipogenic, osteogenic, and neurogenic lineages, were examined in this study. Finally, the creation of anisotropic directional scaffolds that mimic native tissue architecture and promote cell attachment is particularly relevant for applications such as dental tissue regeneration and vascularization. Overall, the presented methodology represents a significant advancement in scaffold fabrication technology with considerable potential for versatility in regenerative medicine and complex tissue regeneration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsPolymersBiocompatible MaterialsCell Culture TechniquesXylenesPorosityAnimalsPolymerizationCell SurvivalMiceTissue EngineeringHumans

Stichwörter der Autor:innen

cell culturepoly-p-xylylenepreload cellscaffoldvapor sublimation and deposition

Substanzen

PolymersBiocompatible MaterialsXylenes

Autor:innen und Institutionen

  • Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan.
  • School of Dentistry, Graduate Institute of Clinical Dentistry, National Taiwan University, Taipei 10048, Taiwan.
  • Molecular Imaging Center, National Taiwan University, Taipei 10617, Taiwan.
  • Department of Otolaryngology, National Taiwan University Hospital, Taipei 10018, Taiwan.

ORCID-Profile: Chung-Ju Chen, Yu-Chih Chiang, Hsien-Yeh Chen

Förderung

  • National Science and Technology Council

Zitieren

APA

Chen, C. J., Lee, C. Y., Chen, M. Y., Shi, Y. H., Chiang, Y. C., Wu, C. C., & Chen, H. Y. (2025). Pre-Loading of Cells via Vapor Sublimation and the Deposition Polymerization Process with a 3D Porous Scaffold for Cell Cultures. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.5c00439

Vancouver

Chen CJ, Lee CY, Chen MY, Shi YH, Chiang YC, Wu CC, et al. Pre-Loading of Cells via Vapor Sublimation and the Deposition Polymerization Process with a 3D Porous Scaffold for Cell Cultures. ACS Biomaterials Science & Engineering. 2025. doi:10.1021/acsbiomaterials.5c00439

BibTeX
@article{Chen2025,
  author = {Chen, Chung-Ju and Lee, Chin-Yun and Chen, Mei-Yu and Shi, Ying-Hsuan and Chiang, Yu-Chih and Wu, Chen-Chi and Chen, Hsien-Yeh},
  title = {Pre-Loading of Cells via Vapor Sublimation and the Deposition Polymerization Process with a 3D Porous Scaffold for Cell Cultures},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2025},
  doi = {10.1021/acsbiomaterials.5c00439}
}
Kostenlos starten →