EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Repurposing Laboratory Plastic into Functional Fibrous Scaffolds via Green Electrospinning for Cell Culture and Tissue Engineering Applications

Nael Berri, Sandhya Moise, Antonios Keirouz, Andrew Jennings, Bernardo Castro-Dominguez iD, Hannah S Leese iD

ACS Biomaterials Science & Engineering · 2025

DOI: 10.1021/acsbiomaterials.5c00146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2025. Verfasst von Nael Berri und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, University of Bath, Bath BA2 7AY U.K. Hauptthemen laut MEDLINE: Tissue Engineering, Tissue Scaffolds, Cell Culture Techniques, Plastics. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cell culture for tissue engineering is a global and flexible research method that relies heavily on plastic consumables, which generates millions of tons of plastic waste annually. Here, we develop an innovative sustainable method for scaffold production by repurposing spent tissue culture polystyrene into biocompatible microfiber scaffolds, while using environmentally friendly solvents. Our new green electrospinning approach utilizes two green, biodegradable and low-toxicity solvents, dihydrolevoglucosenone (Cyrene) and dimethyl carbonate (DMC) to process laboratory cell culture petri dishes into polymer dopes for electrospinning. Scaffolds produced from these spinning dopes, produced both aligned and non-aligned microfiber configurations, were examined in detail. The scaffolds exhibited mechanical properties comparable to cancellous bones whereby aligned scaffolds achieved an ultimate tensile strength (UTS) of 4.58 ± 0.34 MPa and a Young's modulus of 11.87 ± 0.54 MPa, while the non-aligned scaffolds exhibited a UTS of 4.27 ± 0.92 MPa and a Young's modulus of 20.37 ± 4.85. To evaluate their potential for cell-culture, MG63 osteoblast-like cells were seeded onto aligned and non-aligned scaffolds to assess their biocompatibility, cell adhesion, and differentiation, where the cell viability, DNA content, and proliferation were monitored over 14 days. DNA quantification demonstrated an eight-fold increase from 0.195 μg/mL (day 1) to 1.55 μg/mL (day 14), with a significant rise in cell metabolic activity over 7 days, and no observed cytotoxic effects. Confocal microscopy revealed elongated cell alignment on aligned fiber scaffolds, while rounded, disoriented cells were observed on non-aligned fiber scaffolds. Alizarin Red staining and calcium quantification confirmed osteogenic differentiation, as evidenced by mineral deposition on the scaffolds. This research therefore demonstrates the feasibility of this new method to repurpose laboratory polystyrene waste into sustainable cell culture tissue engineering scaffolds using eco-friendly solvents. Such an approach provides a route for cell culture for tissue engineering related activities to transition towards more sustainable and environmentally conscious scientific practices, thereby aligning with the principles of a circular economy.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringTissue ScaffoldsCell Culture TechniquesPlasticsHumansOsteoblastsBiocompatible MaterialsCell LineTensile StrengthCell ProliferationGreen Chemistry TechnologyCell Differentiation

Stichwörter der Autor:innen

biomaterialscell-scaffold interactionelectrospinninggreen solventsustainable tissue engineeringtissue engineering

Substanzen

Biocompatible MaterialsPlastics

Autor:innen und Institutionen

  • Department of Chemical Engineering, University of Bath, Bath BA2 7AY U.K.
  • Centre for Bioengineering and Biomedical Technologies (CBio), University of Bath, Bath BA2 7AY U.K.
  • Department of Mechanical Engineering, University of Bath, Bath BA2 7AY U.K.
  • Centre for Digital Manufacturing and Design (dMaDe), University of Bath, Bath BA2 7AY U.K.

ORCID-Profile: Bernardo Castro-Dominguez, Hannah S Leese

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Berri, N., Moise, S., Keirouz, A., Jennings, A., Castro-Dominguez, B., & Leese, H. S. (2025). Repurposing Laboratory Plastic into Functional Fibrous Scaffolds via Green Electrospinning for Cell Culture and Tissue Engineering Applications. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.5c00146

Vancouver

Berri N, Moise S, Keirouz A, Jennings A, Castro-Dominguez B, Leese HS. Repurposing Laboratory Plastic into Functional Fibrous Scaffolds via Green Electrospinning for Cell Culture and Tissue Engineering Applications. ACS Biomaterials Science & Engineering. 2025. doi:10.1021/acsbiomaterials.5c00146

BibTeX
@article{Berri2025,
  author = {Berri, Nael and Moise, Sandhya and Keirouz, Antonios and Jennings, Andrew and Castro-Dominguez, Bernardo and Leese, Hannah S},
  title = {Repurposing Laboratory Plastic into Functional Fibrous Scaffolds via Green Electrospinning for Cell Culture and Tissue Engineering Applications},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2025},
  doi = {10.1021/acsbiomaterials.5c00146}
}
Kostenlos starten →