Reconstructing Critical-Sized Mandibular Defects in a Rabbit Model: Enhancing Angiogenesis and Facilitating Bone Regeneration via a Cell-Loaded 3D-Printed Hydrogel–Ceramic Scaffold Application
ACS Biomaterials Science & Engineering · 2024
DOI: 10.1021/acsbiomaterials.4c00580 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2024. Verfasst von Seyyed Sajad Daneshi und 14 weiteren Autor:innen. Beteiligte Einrichtung: Stem Cells Technology Research Center, Shiraz University of Medical Sciences, Shiraz 71348, Iran. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Regeneration, Tissue Scaffolds, Neovascularization, Physiologic. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: NIDCR NIH HHS, NEI NIH HHS, Shiraz University of Medical Sciences.
Abstract (Originalsprache)
In this study, we propose a spatially patterned 3D-printed nanohydroxyapatite (nHA)/beta-tricalcium phosphate (β-TCP)/collagen composite scaffold incorporating human dental pulp-derived mesenchymal stem cells (hDP-MSCs) for bone regeneration in critical-sized defects. We investigated angiogenesis and osteogenesis in a rabbit critical-sized mandibular defect model treated with this engineered construct. The critical and synergistic role of collagen coating and incorporation of stem cells in the regeneration process was confirmed by including a cell-free uncoated 3D-printed nHA/β-TCP scaffold, a stem cell-loaded 3D-printed nHA/β-TCP scaffold, and a cell-free collagen-coated 3D-printed nHA/β-TCP scaffold in the experimental design, in addition to an empty defect. Posteuthanasia evaluations through X-ray analysis, histological assessments, immunohistochemistry staining, histomorphometry, and reverse transcription-polymerase chain reaction (RT-PCR) suggest the formation of substantial woven and lamellar bone in the cell-loaded collagen-coated 3D-printed nHA/β-TCP scaffolds. Histomorphometric analysis demonstrated a significant increase in osteoblasts, osteocytes, osteoclasts, bone area, and vascularization compared to that observed in the control group. Conversely, a significant decrease in fibroblasts/fibrocytes and connective tissue was observed in this group compared to that in the control group. RT-PCR indicated a significant upregulation in the expression of osteogenesis-related genes, including BMP2, ALPL, SOX9, Runx2, and SPP1. The findings suggest that the hDP-MSC-loaded 3D-printed nHA/β-TCP/collagen composite scaffold is promising for bone regeneration in critical-sized defects.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Stem Cells Technology Research Center, Shiraz University of Medical Sciences, Shiraz 71348, Iran.
- Marquette University School of Dentistry, Milwaukee, Wisconsin 53233, United States.
- Tissue Engineering Laboratory, Department of Anatomy, School of Medicine, Shiraz University of Medical Sciences, Shiraz 71348, Iran.
- Department of Oral and Maxillofacial Surgery, School of Dentistry, Birjand University of Medical Sciences, Birjand 97178, Iran.
- Department of Parasitology and Mycology, School of Medicine, Shiraz University of Medical Sciences, Shiraz 71348, Iran.
- Ryangene Biolab Co. LTD, Shiraz 71348, Iran.
ORCID-Profile: Lobat Tayebi, Amir Hossein Hadaegh, Amin Tamadon
Förderung
- NIDCR NIH HHS
- NEI NIH HHS
- Shiraz University of Medical Sciences
Zitieren
APA
Sajad Daneshi, S., Tayebi, L., Talaei-Khozani, T., Tavanafar, S., Hadaegh, A. H., Rasoulianboroujeni, M., Rastegari, B., Asadi-Yousefabad, S. L., Nammian, P., Zare, S., Mussin, N. M., Kaliyev, A. A., Zhelisbayeva, K. R., Tanideh, N., & Tamadon, A. (2024). Reconstructing Critical-Sized Mandibular Defects in a Rabbit Model: Enhancing Angiogenesis and Facilitating Bone Regeneration via a Cell-Loaded 3D-Printed Hydrogel–Ceramic Scaffold Application. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.4c00580
Vancouver
Sajad Daneshi S, Tayebi L, Talaei-Khozani T, Tavanafar S, Hadaegh AH, Rasoulianboroujeni M, et al. Reconstructing Critical-Sized Mandibular Defects in a Rabbit Model: Enhancing Angiogenesis and Facilitating Bone Regeneration via a Cell-Loaded 3D-Printed Hydrogel–Ceramic Scaffold Application. ACS Biomaterials Science & Engineering. 2024. doi:10.1021/acsbiomaterials.4c00580
BibTeX
@article{SajadDaneshi2024,
author = {Sajad Daneshi, Seyyed and Tayebi, Lobat and Talaei-Khozani, Tahereh and Tavanafar, Saeid and Hadaegh, Amir Hossein and Rasoulianboroujeni, Morteza and Rastegari, Banafsheh and Asadi-Yousefabad, Seyedeh-Leili and Nammian, Pegah and Zare, Shahrokh and Mussin, Nadiar M and Kaliyev, Asset A and Zhelisbayeva, Kulyash R and Tanideh, Nader and Tamadon, Amin},
title = {Reconstructing Critical-Sized Mandibular Defects in a Rabbit Model: Enhancing Angiogenesis and Facilitating Bone Regeneration via a Cell-Loaded 3D-Printed Hydrogel–Ceramic Scaffold Application},
journal = {ACS Biomaterials Science & Engineering},
year = {2024},
doi = {10.1021/acsbiomaterials.4c00580}
}
EUVIMED