A Novel Strategy for Fabrication of Polyamide 66/Nanohydroxyapatite Composite Bone Repair Scaffolds by Low-Temperature Three-Dimensional Printing
ACS Biomaterials Science & Engineering · 2024
DOI: 10.1021/acsbiomaterials.4c00457 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Biomaterials Science & Engineering, 2024. Verfasst von Jiaxin Hu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Nano-Biomaterials Analytical and Testing Center, Sichuan University, Chengdu 610065, China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Durapatite, Tissue Scaffolds, Nylons. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.
Abstract (Originalsprache)
Due to the decomposition temperature of Polyamide 66 (PA66) in the environment is close to its thermoforming temperature, it is difficult to construct porous scaffolds of PA66/nanohydroxyapatite (PA66/HAp) by fused deposition modeling (FDM) three-dimensional (3D) printing. In this study, we demonstrated for the first time a method for 3D printing PA66/HAp composites at room temperature, prepared PA66/HAp printing ink using a mixed solvent of formic acid/dichloromethane (FA/DCM), and constructed a series of composite scaffolds with varying HAp content. This printing system can print composite materials with a high HAp content of 60 wt %, which is close to the mineral content in natural bone. The physicochemical evaluation presented that the hydroxyapatite was uniformly distributed within the PA66 matrix, and the PA66/HAp composite scaffold with 30 wt % HAp content exhibited optimal mechanical properties and printability. The results of in vitro cell culture experiments indicated that the incorporation of HAp into the PA66 matrix significantly improved the cell adhesion, proliferation, and osteogenic differentiation of bone marrow stromal cells (BMSCs) cultured on the scaffold. In vivo animal experiments suggested that the PA66/HAp composite material with 30 wt % HAp content had the best structural maintenance and osteogenic performance. The three-dimensional PA66/HAp composite scaffold prepared by low temperature printing in the current study holds great potential for the repair of large-area bone defects.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Research Center for Nano-Biomaterials Analytical and Testing Center, Sichuan University, Chengdu 610065, China.
ORCID-Profile: Jiaxin Hu
Förderung
- National Key Research and Development Program of China
- Fundamental Research Funds for the Central Universities
- National Natural Science Foundation of China
- Sichuan International Science and Technology Innovation Cooperation Project
Zitieren
APA
Hu, J., Wei, J., Liu, J., Yuan, L., Li, Y., Luo, X., Li, Y., & Li, J. (2024). A Novel Strategy for Fabrication of Polyamide 66/Nanohydroxyapatite Composite Bone Repair Scaffolds by Low-Temperature Three-Dimensional Printing. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.4c00457
Vancouver
Hu J, Wei J, Liu J, Yuan L, Li Y, Luo X, et al. A Novel Strategy for Fabrication of Polyamide 66/Nanohydroxyapatite Composite Bone Repair Scaffolds by Low-Temperature Three-Dimensional Printing. ACS Biomaterials Science & Engineering. 2024. doi:10.1021/acsbiomaterials.4c00457
BibTeX
@article{Hu2024,
author = {Hu, Jiaxin and Wei, Jiawei and Liu, Jiangshan and Yuan, Li and Li, Yongzhi and Luo, Xue and Li, Yubao and Li, Jidong},
title = {A Novel Strategy for Fabrication of Polyamide 66/Nanohydroxyapatite Composite Bone Repair Scaffolds by Low-Temperature Three-Dimensional Printing},
journal = {ACS Biomaterials Science & Engineering},
year = {2024},
doi = {10.1021/acsbiomaterials.4c00457}
}
EUVIMED