EUVIMEDEUVIMED entdecken
Vergleichsstudie

Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials

Zhiwei Ren, Hongyan Chen, Ruili Wang iD, Meifang Zhu iD

ACS Biomaterials Science & Engineering · 2024

DOI: 10.1021/acsbiomaterials.4c00403 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift ACS Biomaterials Science & Engineering, 2024. Verfasst von Zhiwei Ren und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Sha…. Hauptthemen laut MEDLINE: Composite Resins, Materials Testing. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of dental resin composites is crucially influenced by the sizes and distributions of inorganic fillers. Despite the investigation of a variety of functional particles, glass fillers and nanoscale silica are still the predominant types in dental materials. However, achieving an overall improvement in the performance of resin composites through the optimization of their formulations remains a challenge. This work introduced a “dense” microhybrid filler system with 85 wt % filler loading, leading to the preparation of self-developed resin composites (SRCs). Comparative evaluations of these five SRCs against four commercial products were performed, including mechanical property, polymerization conversion, and shrinkage, along with water sorption and solubility and wear resistance. The results showed that among all SRC groups, SRC3 demonstrated superior mechanical performance, high polymerization conversion, reduced shrinkage, low water absorption and solubility, and acceptable wear resistance. In contrast to commercial products, this optimal SRC3 material was comparable to Z350 XT in flexural and diametral tensile strength and better in flexural modulus and surface hardness. The use of a “dense” microhybrid filler system in the development of resin composites provides a balance between physicochemical property and wear resistance, which may be a promising strategy for the development of composite products.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Composite ResinsMaterials TestingSolubilityTensile StrengthDental MaterialsPolymerizationPolyurethanesSurface PropertiesHardnessAcrylic Resins

Stichwörter der Autor:innen

dental compositesfiller formulationfiller packingphysicochemical propertywear behavior

Substanzen

Composite ResinsComposite Dental ResinDental MaterialsPolyurethanesAcrylic Resins

Autor:innen und Institutionen

  • State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.
  • Shanghai Engineering Research Center of Advanced Dental Technology and Materials, Shanghai Key Laboratory of Stomatology, Shanghai Research Institute of Stomatology, National Clinical Research Center for Oral Diseases,…

ORCID-Profile: Ruili Wang, Meifang Zhu

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Ren, Z., Chen, H., Wang, R., & Zhu, M. (2024). Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials. ACS Biomaterials Science & Engineering. https://doi.org/10.1021/acsbiomaterials.4c00403

Vancouver

Ren Z, Chen H, Wang R, Zhu M. Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials. ACS Biomaterials Science & Engineering. 2024. doi:10.1021/acsbiomaterials.4c00403

BibTeX
@article{Ren2024,
  author = {Ren, Zhiwei and Chen, Hongyan and Wang, Ruili and Zhu, Meifang},
  title = {Comparative Assessments of Dental Resin Composites: A Focus on Dense Microhybrid Materials},
  journal = {ACS Biomaterials Science & Engineering},
  year = {2024},
  doi = {10.1021/acsbiomaterials.4c00403}
}
Kostenlos starten →