EUVIMEDEUVIMED entdecken
Crossref

DIW-Printed Biomass-Based Radiative Coolers with Phase Change for Extended Thermoelectric Output

Xiaojie Shi, Keqing Xu, Haonan Jin, Bo Lin, Linxia Cui, Ke Zhao, Chuhang Liu, Chaozheng Liu, Changtong Mei

ACS Applied Polymer Materials · 11.11.2026

DOI: 10.1021/acsapm.6c04206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 11.11.2026. Verfasst von Xiaojie Shi und 8 weiteren Autor:innen. Die Arbeit nennt 57 Literaturangaben. Gefördert von: Graduate Research and Innovation Projects of Jiangsu Province, Natural Science Foundation of Jiangsu Province, Nanjing Forestry University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Radiative cooling offers a low-energy route for thermal management, but conventional coolers are difficult to match with fluctuating heat loads and suffer from nighttime overcooling. Hence, dynamic radiative coolers were developed through direct ink writing (DIW) of a composite gel ink (MH) comprising thermally treated cellulose nanocrystals (HTCNCs) and a microencapsulated phase change material (MEPCM). A simple thermal treatment converts a low-concentration cellulose nanocrystal (CNC) suspension into a self-supporting HTCNCs gel through localized hydrolysis, promoting the formation of a hydrogen-bonded network. The HTCNCs scaffold provides structural support and mid-infrared emission, whereas MEPCM introduces latent heat storage and release. Accordingly, DIW-printed MH exhibits an average solar reflectance of 96.8% and an average emissivity of 87.0%. Outdoor tests show that the DIW-printed MH cooler lowers the daytime temperature by 2.5 °C and suppresses overcooling at night. When integrated with a thermoelectric generator (TEG), DIW-printed MH effectively extends the duration of the temperature difference between the hot and cold ends. This study provides a strategy for designing dynamic radiative cooling materials and sustainable thermoelectric power generation systems.

Förderung

  • Graduate Research and Innovation Projects of Jiangsu Province
  • Natural Science Foundation of Jiangsu Province
  • Nanjing Forestry University
  • 2024 Training Program of Innovation and Entrepreneurship for Undergraduates

Zitieren

APA

Shi, X., Xu, K., Jin, H., Lin, B., Cui, L., Zhao, K., Liu, C., Liu, C., & Mei, C. (2026). DIW-Printed Biomass-Based Radiative Coolers with Phase Change for Extended Thermoelectric Output. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.6c04206

Vancouver

Shi X, Xu K, Jin H, Lin B, Cui L, Zhao K, et al. DIW-Printed Biomass-Based Radiative Coolers with Phase Change for Extended Thermoelectric Output. ACS Applied Polymer Materials. 2026. doi:10.1021/acsapm.6c04206

BibTeX
@article{Shi2026,
  author = {Shi, Xiaojie and Xu, Keqing and Jin, Haonan and Lin, Bo and Cui, Linxia and Zhao, Ke and Liu, Chuhang and Liu, Chaozheng and Mei, Changtong},
  title = {DIW-Printed Biomass-Based Radiative Coolers with Phase Change for Extended Thermoelectric Output},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  doi = {10.1021/acsapm.6c04206}
}
Kostenlos starten →