EUVIMEDEUVIMED entdecken
Crossref

Boron–Oxygen Precursor Engineering Enhances Shear Stiffening and High-Strain-Rate Mechanical Response of Polyborosiloxane Gels

Zhiguo Zhao, Yuying Xie, Yidan Chen, Wei Li

ACS Applied Polymer Materials · 13.11.2026 · 8 (21) · 20120-20130

DOI: 10.1021/acsapm.6c04146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 03.11.2026. Verfasst von Zhiguo Zhao und 3 weiteren Autor:innen. Die Arbeit nennt 39 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyborosiloxane-based shear-stiffening materials are promising candidates for flexible impact-protection systems because they combine a strong high-strain-rate mechanical response with long-time scale deformability. However, in conventional dehydration–condensation synthesis, improving the high-strain-rate mechanical response generally requires a higher boric acid feed to enhance the contribution of dynamic boron-containing linkages. At higher feed levels, direct incorporation of boric acid can lead to macroscopic heterogeneity and loss of gel deformability, thereby limiting the accessible high-boron composition range. Herein, a boron–oxygen precursor strategy was developed by reacting boric acid with dichlorodimethylsilane to regulate the formation of dynamic boron-containing networks in polyborosiloxane gels. This precursor route converts boric acid into borosiloxane oligomeric structures bearing multiple reactive B–OH functionalities, which alter how boron-containing species are incorporated into the network and thereby enable higher boron incorporation while retaining a macroscopically homogeneous, deformable gel state. The resulting Si–O–B linkages can act as transient load-bearing junctions. Compared with conventionally synthesized gels, the precursor-derived polyborosiloxane gels exhibit stronger frequency-dependent shear stiffening and higher storage modulus. The resulting high-boron-content gel achieves a dynamic compressive modulus of 123.43 MPa at a strain rate of 12 000 s–1 while maintaining pronounced cold-flow behavior. Moreover, under high-strain-rate loading, its mechanical response falls between those of conventional soft elastomers and higher-modulus polyurethane materials under high-strain-rate loading, while it also exhibits relatively high dynamic wave impedance and favorable self-healing capability. This precursor-based network design strategy provides a pathway for developing flexible polymeric protective materials that reconcile high-strain-rate mechanical response with long-time scale deformability.

Zitieren

APA

Zhao, Z., Xie, Y., Chen, Y., & Li, W. (2026). Boron–Oxygen Precursor Engineering Enhances Shear Stiffening and High-Strain-Rate Mechanical Response of Polyborosiloxane Gels. ACS Applied Polymer Materials, 8(21), 20120-20130. https://doi.org/10.1021/acsapm.6c04146

Vancouver

Zhao Z, Xie Y, Chen Y, Li W. Boron–Oxygen Precursor Engineering Enhances Shear Stiffening and High-Strain-Rate Mechanical Response of Polyborosiloxane Gels. ACS Applied Polymer Materials. 2026;8(21):20120-20130. doi:10.1021/acsapm.6c04146

BibTeX
@article{Zhao2026,
  author = {Zhao, Zhiguo and Xie, Yuying and Chen, Yidan and Li, Wei},
  title = {Boron–Oxygen Precursor Engineering Enhances Shear Stiffening and High-Strain-Rate Mechanical Response of Polyborosiloxane Gels},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {21},
  pages = {20120--20130},
  doi = {10.1021/acsapm.6c04146}
}
Kostenlos starten →