EUVIMEDEUVIMED entdecken
Crossref

AlCl3–Assisted Mechanochemical Transformation of Polyethylene into C7–C15 Liquid Hydrocarbons

Wenqing An, Fengshu Kang, Yu Cheng, Mingxuan Ren, Dong Chen, Leyu Nie, Xiaonan Zhang, Xiaodong Zhang, Deshuai Sun, Zhaojun Chen

ACS Applied Polymer Materials · 13.11.2026 · 8 (21) · 19842-19853

DOI: 10.1021/acsapm.6c03628 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 28.10.2026. Verfasst von Wenqing An und 9 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China (NSFC).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The transformation of polyethylene (PE) into recoverable liquid hydrocarbons under solvent-free conditions without external heating remains challenging. Here, we report an AlCl3-assisted mechanochemical approach that produces a liquid hydrocarbon fraction concentrated in the C7–C15 range. Under the selected conditions, the gravimetrically determined extent of PE degradation was approximately 97%, whereas the yield of CH2Cl2-soluble, GC-detectable hydrocarbons was approximately 62 wt % relative to the initial PE mass. These values describe different aspects of the process; the latter does not represent total product yield. The stainless-steel and ZrO2 milling assemblies gave different product distributions, with greater contributions from lower-carbon-number and olefin-associated products in the stainless-steel assembly and from higher-carbon-number and monoaromatic-assigned components in the ZrO2 assembly. GC–MS, GC × GC–TOFMS, and NMR identified olefinic, cyclic, and monoaromatic structures in the recovered fraction. Time-resolved analysis showed a shift from higher- to lower-carbon-number products during milling. SEC, trapping, rearrangement-probe, and model-substrate experiments are consistent with mechanically induced chain scission involving radical processes and AlCl3-assisted secondary transformation. The trapping and rearrangement results also provide indirect evidence compatible with transient electrophilic intermediates, although the elementary pathway and temporal sequence remain unresolved. This study demonstrates liquid-hydrocarbon formation from PE under Lewis-acid-assisted mechanochemical conditions.

Förderung

  • Natural Science Foundation of Shandong Province
  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

An, W., Kang, F., Cheng, Y., Ren, M., Chen, D., Nie, L., Zhang, X., Zhang, X., Sun, D., & Chen, Z. (2026). AlCl3–Assisted Mechanochemical Transformation of Polyethylene into C7–C15 Liquid Hydrocarbons. ACS Applied Polymer Materials, 8(21), 19842-19853. https://doi.org/10.1021/acsapm.6c03628

Vancouver

An W, Kang F, Cheng Y, Ren M, Chen D, Nie L, et al. AlCl3–Assisted Mechanochemical Transformation of Polyethylene into C7–C15 Liquid Hydrocarbons. ACS Applied Polymer Materials. 2026;8(21):19842-19853. doi:10.1021/acsapm.6c03628

BibTeX
@article{An2026,
  author = {An, Wenqing and Kang, Fengshu and Cheng, Yu and Ren, Mingxuan and Chen, Dong and Nie, Leyu and Zhang, Xiaonan and Zhang, Xiaodong and Sun, Deshuai and Chen, Zhaojun},
  title = {AlCl3–Assisted Mechanochemical Transformation of Polyethylene into C7–C15 Liquid Hydrocarbons},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {21},
  pages = {19842--19853},
  doi = {10.1021/acsapm.6c03628}
}
Kostenlos starten →