Mixed-Cation Halide Perovskite–Polyvinylidene Fluoride (PVDF) Composite Films for Flexible, Self-Powered Piezoelectric Strain Sensors
ACS Applied Polymer Materials · 22.11.2026
DOI: 10.1021/acsapm.6c03529 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 22.11.2026. Verfasst von Murthy D. Srinivas und 2 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
Organic–inorganic metal halide perovskite (OIMH)-polymer composites have emerged as promising multifunctional materials for flexible energy harvesting and self-powered sensing. Herein, we report the fabrication and optimization of flexible Cs0.05(FA0.85MA0.15)0.95Pb(I0.83Br0.17)3 (CFM)-PVDF composite films for high-performance piezoelectric nanogenerators. The processing conditions were systematically optimized by comparing drop-cast composite films annealed at 90 and 120 °C for 2 h. X-ray diffraction, ATR-FTIR, and FESEM analyses confirmed that annealing at 120 °C produced superior crystallinity, enhanced β-phase formation, and improved microstructural uniformity, and was therefore selected for all subsequent investigations. Among the investigated compositions, the CFMP-25% v/v composite exhibited the highest piezoelectric coefficient (d33 = 50.03 pm V–1), together with the largest remanent polarization (Pr = 0.0597 μC cm–2) and saturation polarization (Ps = 0.1317 μC cm–2), demonstrating significantly enhanced electromechanical coupling. Broadband dielectric spectroscopy and nanoindentation further revealed improved dielectric and mechanical properties with optimized filler loading. The piezoelectric output increased progressively with CFMP concentration up to 25% v/v and decreased at higher loadings, indicating an optimal perovskite content for efficient stress transfer and polarization. The optimized CFMP-25% v/v device delivered a maximum output voltage of 123.5 V, corresponding to a 6.175-fold enhancement over neat PVDF. Stable operation under a constant compressive load of 20 N at excitation frequencies of 5 and 10 Hz, together with efficient capacitor charging and reliable strain-sensing performance, demonstrates the excellent multifunctionality of the composite.
Zitieren
APA
Srinivas, M. D., Mallick, S., & Bhargava, P. (2026). Mixed-Cation Halide Perovskite–Polyvinylidene Fluoride (PVDF) Composite Films for Flexible, Self-Powered Piezoelectric Strain Sensors. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.6c03529
Vancouver
Srinivas MD, Mallick S, Bhargava P. Mixed-Cation Halide Perovskite–Polyvinylidene Fluoride (PVDF) Composite Films for Flexible, Self-Powered Piezoelectric Strain Sensors. ACS Applied Polymer Materials. 2026. doi:10.1021/acsapm.6c03529
BibTeX
@article{Srinivas2026,
author = {Srinivas, Murthy D. and Mallick, Sudhanshu and Bhargava, Parag},
title = {Mixed-Cation Halide Perovskite–Polyvinylidene Fluoride (PVDF) Composite Films for Flexible, Self-Powered Piezoelectric Strain Sensors},
journal = {ACS Applied Polymer Materials},
year = {2026},
doi = {10.1021/acsapm.6c03529}
}
EUVIMED