EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structure and Dynamics of High-Density Polyethylene Cross-linked by an Azidotriazine via Reactive Extrusion

Stefano Chiani, Frances Abygail F. Genio, Michail Danikas, Nathan J. Van Zee, Renaud Nicolaÿ, Costantino Creton, George Floudas

ACS Applied Polymer Materials · 05.11.2026

DOI: 10.1021/acsapm.6c03473 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 05.11.2026. Verfasst von Stefano Chiani und 6 weiteren Autor:innen. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: H2020 Marie Sklodowska-Curie Actions, Institut Carnot Microfluidique, Région Île de France.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Azidotriazine incorporated into high-density polyethylene (HDPE) by reactive extrusion gives rise to covalent adaptable networks (CANs) while simultaneously enhancing the PE chain mobility at the crystal–amorphous interface, altering the semicrystalline morphology and the molecular dynamics. Increasing azidotriazine T-N3 loading lowers the equilibrium melting temperature and reduces the degree of crystallinity, indicating that the dynamic cross-links interfere with polyethylene chain packing during crystal growth. Isothermally crystallized HDPE revealed the emergence of two distinct lamellar populations, reflecting modified crystallization kinetics. Small- and wide-angle X-ray scattering revealed that the triazine-based grafts, dynamic cross-links, and ungrafted byproducts are preferentially located in the restricted amorphous phase adjacent to the crystalline lamellae. There, they act as plasticizers by reducing the crystalline lamellar thickness and the effective fold surface free energy while promoting lamellar thickening at lower temperatures as compared to bulk HDPE. Dielectric spectroscopy further revealed two segmental processes corresponding to two liquid-to-glass temperatures with enhanced segmental mobility with increasing T-N3 loading. These results demonstrate that covalent adaptable networks of semicrystalline polymers prepared via reactive extrusion can exhibit unanticipated structural and dynamic features that reflect the chemical composition and the topology of the final products. Furthermore, results from present azidotriazine-based CANs are compared to earlier dioxaborolane-based vitrimers as well as to permanently cross-linked PE with a homogeneous distribution of cross-links.

Förderung

  • H2020 Marie Sklodowska-Curie Actions
  • Institut Carnot Microfluidique
  • Région Île de France

Zitieren

APA

Chiani, S., Genio, F. A. F., Danikas, M., Zee, N. J. V., Nicolaÿ, R., Creton, C., & Floudas, G. (2026). Structure and Dynamics of High-Density Polyethylene Cross-linked by an Azidotriazine via Reactive Extrusion. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.6c03473

Vancouver

Chiani S, Genio FAF, Danikas M, Zee NJV, Nicolaÿ R, Creton C, et al. Structure and Dynamics of High-Density Polyethylene Cross-linked by an Azidotriazine via Reactive Extrusion. ACS Applied Polymer Materials. 2026. doi:10.1021/acsapm.6c03473

BibTeX
@article{Chiani2026,
  author = {Chiani, Stefano and Genio, Frances Abygail F. and Danikas, Michail and Zee, Nathan J. Van and Nicolaÿ, Renaud and Creton, Costantino and Floudas, George},
  title = {Structure and Dynamics of High-Density Polyethylene Cross-linked by an Azidotriazine via Reactive Extrusion},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  doi = {10.1021/acsapm.6c03473}
}
Kostenlos starten →