EUVIMEDEUVIMED entdecken
Crossref

Lightweight and Scalable Hierarchically Engineered Epoxy–Graphite Composite Coatings for Passive Thermal Management of Photovoltaic Modules

Wassana Duangpirom, Sutthiphan Vajirakaphan, Phiralang Marbaniang, Wannapol Sadakorn, Wijak Yospanya, Joongjai Panpranot, Thanakorn Wasanapiarnpong, Anongnat Somwangthanaroj, Soorathep Kheawhom, Lapyote Prasittisopin, Rongrong Cheacharoen, Chanon Pornrungroj

ACS Applied Polymer Materials · 13.11.2026 · 8 (21) · 19391-19403

DOI: 10.1021/acsapm.6c03190 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 26.10.2026. Verfasst von Wassana Duangpirom und 11 weiteren Autor:innen. Die Arbeit nennt 60 Literaturangaben. Gefördert von: Royal Academy of Engineering, Japan Society for the Promotion of Science, Chulalongkorn University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photovoltaic (PV) technology is central to global decarbonization efforts, however, PV deployment in hot and humid climates, such as those prevalent in ASEAN countries, is severely constrained by elevated operating temperatures that can exceed ∼60 °C, leading to accelerated degradation and reduced energy conversion efficiency. Although numerous thermal management strategies have been explored, many rely on active cooling or complex system integration, introducing penalties in cost, weight, and scalability. Here, we report a lightweight and scalable passive cooling strategy based on a thermally conductive epoxy coating that can be directly applied to the rear surface of PV modules. The epoxy matrix is engineered with bulk graphite (GC) and graphitic carbon quantum dots (GCQD) to enhance heat dissipation through the backsheet. Coatings were fabricated using a doctor-blade process with GC loadings ranging from 10 to 70 parts per hundred resin (phr) to systematically evaluate structure–property–performance relationships. An optimized composite formulation incorporating GC (50 phr) and a small fraction of GCQD (4 phr) exhibits markedly enhanced thermal transport, resulting in a surface temperature reduction of 2–3 °C under outdoor operating conditions. This temperature suppression translates to a relative efficiency gain of up to ∼9% at ∼48 °C while maintaining a low coating density of 1.43 g cm–3. The combination of low cost, minimal added weight, and scalable processing makes this epoxy-based coating a practical passive thermal management solution for large-area PV installations in high-temperature environments, with potential benefits for module reliability and lifetime extension.

Förderung

  • Royal Academy of Engineering
  • Japan Society for the Promotion of Science
  • Chulalongkorn University
  • Program Management Unit for Frontier Brainpower and Future Industries

Zitieren

APA

Duangpirom, W., Vajirakaphan, S., Marbaniang, P., Sadakorn, W., Yospanya, W., Panpranot, J., Wasanapiarnpong, T., Somwangthanaroj, A., Kheawhom, S., Prasittisopin, L., Cheacharoen, R., & Pornrungroj, C. (2026). Lightweight and Scalable Hierarchically Engineered Epoxy–Graphite Composite Coatings for Passive Thermal Management of Photovoltaic Modules. ACS Applied Polymer Materials, 8(21), 19391-19403. https://doi.org/10.1021/acsapm.6c03190

Vancouver

Duangpirom W, Vajirakaphan S, Marbaniang P, Sadakorn W, Yospanya W, Panpranot J, et al. Lightweight and Scalable Hierarchically Engineered Epoxy–Graphite Composite Coatings for Passive Thermal Management of Photovoltaic Modules. ACS Applied Polymer Materials. 2026;8(21):19391-19403. doi:10.1021/acsapm.6c03190

BibTeX
@article{Duangpirom2026,
  author = {Duangpirom, Wassana and Vajirakaphan, Sutthiphan and Marbaniang, Phiralang and Sadakorn, Wannapol and Yospanya, Wijak and Panpranot, Joongjai and Wasanapiarnpong, Thanakorn and Somwangthanaroj, Anongnat and Kheawhom, Soorathep and Prasittisopin, Lapyote and Cheacharoen, Rongrong and Pornrungroj, Chanon},
  title = {Lightweight and Scalable Hierarchically Engineered Epoxy–Graphite Composite Coatings for Passive Thermal Management of Photovoltaic Modules},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {21},
  pages = {19391--19403},
  doi = {10.1021/acsapm.6c03190}
}
Kostenlos starten →