EUVIMEDEUVIMED entdecken
Crossref

Poly(ethylene imine)-Based Covalent Adaptable Networks: Influence of the Dialdehyde Structure on Thermoset Properties

Patricia Ynes Batista Peguero, Laurent Lebrun, Luis Miguel Nunez Tapia, Alain Ledoux, Fabrice Burel

ACS Applied Polymer Materials · 29.10.2026

DOI: 10.1021/acsapm.6c02935 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 29.10.2026. Verfasst von Patricia Ynes Batista Peguero und 4 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: Ministerio de Educación Superior, Ciencia y Tecnología of the Dominican Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the aim of developing circular thermosets, with CO2 absorption properties, branched polyethylenimine based covalent adaptable networks were synthesized using cross-linker agents derived from hydroxybenzaldehyde, a wood derivative, and deeply characterized. The incorporation of dynamic imine bonds within the network led to thermoreversible materials capable of rearranging upon heating. Network relaxation was studied and activation energy (Ea) determined following Kohlrausch–Williams–Watt (KWW) model. Ea ranging from 20 to 75 kJ/mol were determined according to the thermoset structure. Reprocessability of the materials by thermal compression molding over 120 °C was achieved and complete recovery of the mechanical properties was still evidenced after three reprocessing cycles indicating a possible circularity of these thermosets. When the cross-linking agent did not contain any poly(ethylene glycol) (PEG) moiety, networks ranging from gums to rigid materials were obtained with glass transition temperatures (Tg) ranging from −40 to 39 °C depending on the cross-linker concentration. Swelling rate ranged from 368% to 42% and extraction rate from 21% to 5%. When the cross-linking agent contained a PEG block, softer materials were obtained with Tg ranging from −6 to 22 °C, swelling rates ranging from 515% to 84% and extraction rate from 68% to 1%. CO2 absorption, studied using thermogravimetric analysis, was more pronounced for these last PEG-containing materials confirming PEG affinity for this polar gas.

Förderung

  • Ministerio de Educación Superior, Ciencia y Tecnología of the Dominican Republic

Zitieren

APA

Peguero, P. Y. B., Lebrun, L., Tapia, L. M. N., Ledoux, A., & Burel, F. (2026). Poly(ethylene imine)-Based Covalent Adaptable Networks: Influence of the Dialdehyde Structure on Thermoset Properties. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.6c02935

Vancouver

Peguero PYB, Lebrun L, Tapia LMN, Ledoux A, Burel F. Poly(ethylene imine)-Based Covalent Adaptable Networks: Influence of the Dialdehyde Structure on Thermoset Properties. ACS Applied Polymer Materials. 2026. doi:10.1021/acsapm.6c02935

BibTeX
@article{Peguero2026,
  author = {Peguero, Patricia Ynes Batista and Lebrun, Laurent and Tapia, Luis Miguel Nunez and Ledoux, Alain and Burel, Fabrice},
  title = {Poly(ethylene imine)-Based Covalent Adaptable Networks: Influence of the Dialdehyde Structure on Thermoset Properties},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  doi = {10.1021/acsapm.6c02935}
}
Kostenlos starten →