High Lithium-Ion Transference Number of Composite Polymer Electrolytes Enabled by Defect-Engineered Metal–Organic Frameworks
ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 13311-13320
DOI: 10.1021/acsapm.6c02574 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 04.08.2026. Verfasst von Wenhao Pan und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Department of Science and Technology of Hubei Province, China Postdoctoral Science Foundation, National Natural Science Foundation of China.
Abstract (Originalsprache)
One of the major challenges of polymer-based solid electrolytes is their relatively low lithium-ion transference number (tLi+), which will induce severe concentration polarization within the electrolytes, thereby compromising the rate capability. Herein, a series of defect-engineered metal organic framework (MOF) was constructed through thermal treatment at different temperatures and then incorporated into a polyacrylonitrile (PAN) electrospun framework to fabricate an in situ polymerized 1,3-dioxolane (DOL) electrolyte. The defect engineering of MOF-303-X (X represents the heat treatment temperature) exposed abundant open metal sites, which effectively promoted lithium-salt dissociation and enhanced the selective transport of Li+, leading to a remarkable increase in the tLi+ up to 0.86. In addition, the porous structure of the MOF, together with the interconnected fibrous network, established continuous ion-transport pathways that facilitated rapid lithium-ion migration, enabling an ionic conductivity of 9.94 × 10–3 mS cm–1 at room temperature. As a result, the Li||Li symmetric cell delivered stable cycling over 1000 h at 0.1 mA cm–2 with a low overpotential of ∼11 mV. Furthermore, the assembled LFP||Li full cell exhibited excellent rate capability and long-term cycling stability, maintaining a discharge capacity of 92.34 mAh g–1 with the capacity retention of 82.4% after 200 cycles at 5C. This work provides an effective strategy for constructing high Li+ transference solid-state electrolytes through defect engineering of MOFs for high-performance lithium metal batteries.
Förderung
- Department of Science and Technology of Hubei Province
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- Overseas Expertise Introduction Project for Discipline Innovation
Zitieren
APA
Pan, W., Yan, P., Peng, D., Huang, J., Tang, M., & Wang, Z. (2026). High Lithium-Ion Transference Number of Composite Polymer Electrolytes Enabled by Defect-Engineered Metal–Organic Frameworks. ACS Applied Polymer Materials, 8(15), 13311-13320. https://doi.org/10.1021/acsapm.6c02574
Vancouver
Pan W, Yan P, Peng D, Huang J, Tang M, Wang Z. High Lithium-Ion Transference Number of Composite Polymer Electrolytes Enabled by Defect-Engineered Metal–Organic Frameworks. ACS Applied Polymer Materials. 2026;8(15):13311-13320. doi:10.1021/acsapm.6c02574
BibTeX
@article{Pan2026,
author = {Pan, Wenhao and Yan, Pengbo and Peng, Duo and Huang, Jiming and Tang, Mi and Wang, Zhengbang},
title = {High Lithium-Ion Transference Number of Composite Polymer Electrolytes Enabled by Defect-Engineered Metal–Organic Frameworks},
journal = {ACS Applied Polymer Materials},
year = {2026},
volume = {8},
number = {15},
pages = {13311--13320},
doi = {10.1021/acsapm.6c02574}
}
EUVIMED