High-Lignin Polyurethane Foams via a Eutectic-Like Polyol Strategy: Enabling Scalable Processing and Enhanced Structural Performance
ACS Applied Polymer Materials · 11.09.2026 · 8 (17) · 15227-15243
DOI: 10.1021/acsapm.6c02443 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 21.08.2026. Verfasst von Yanpeng Luo und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Shaanxi University of Science and Technology, Open Foundation of Key Laboratory of Auxiliary Chemistry and Technology for Chemical Industry, Ministry of Education, Yibin City Major Bamboo Industry Research & Development Project.
Abstract (Originalsprache)
Replacing petroleum-derived polyols with lignin in polyurethane foams is essential for increasing renewable carbon utilization but is hindered by lignin’s heterogeneity, poor solubility, and limited reactivity. Here, we report a hydrogen-bond-engineered, eutectic-like polyol platform based on polyethylene glycol (PEG) and salicylic acid (SA), with ethylene carbonate (EC) as a cosolvent, enabling high lignin incorporation in the polyurethane foam formulation while maintaining its processability. Structural and thermal analyses confirm the formation of a homogeneous amorphous system, in which EC disrupts intermolecular interactions and enhances chain mobility, reducing the viscosity of the foam formulation to industrially relevant levels (<5 Pa·s). This platform enables the direct substitution of up to 80 wt % of the petroleum-based polyol with kraft lignin, without chemical modification, in the foam formulation. The resulting foams exhibit uniform closed-cell morphology with reduced cell size (287 ± 154 μm), enhanced network integration, improved compressive strength (0.26 MPa) and hydrophobicity, and increased thermal stability. Notably, the foams with a high lignin content demonstrate delayed heat penetration under external heating conditions, which is associated with the formation of stable closed-cell structures. This one-pot, room-temperature strategy provides a promising pathway toward the scalable development of high-lignin polyurethane foams with substantially increased renewable carbon content.
Förderung
- Shaanxi University of Science and Technology
- Open Foundation of Key Laboratory of Auxiliary Chemistry and Technology for Chemical Industry, Ministry of Education
- Yibin City Major Bamboo Industry Research & Development Project
- Forestry Science & Technology Project of Zhejiang Provincial Academy Co-operation
Zitieren
APA
Luo, Y., Cheng, J., Fang, G., Fatehi, P., Zhao, M., Wang, X., Shao, X., Zhang, S., & Wu, T. (2026). High-Lignin Polyurethane Foams via a Eutectic-Like Polyol Strategy: Enabling Scalable Processing and Enhanced Structural Performance. ACS Applied Polymer Materials, 8(17), 15227-15243. https://doi.org/10.1021/acsapm.6c02443
Vancouver
Luo Y, Cheng J, Fang G, Fatehi P, Zhao M, Wang X, et al. High-Lignin Polyurethane Foams via a Eutectic-Like Polyol Strategy: Enabling Scalable Processing and Enhanced Structural Performance. ACS Applied Polymer Materials. 2026;8(17):15227-15243. doi:10.1021/acsapm.6c02443
BibTeX
@article{Luo2026,
author = {Luo, Yanpeng and Cheng, Jinyuan and Fang, Guigan and Fatehi, Pedram and Zhao, Mengke and Wang, Xiaofa and Shao, Xinyi and Zhang, Sufeng and Wu, Ting},
title = {High-Lignin Polyurethane Foams via a Eutectic-Like Polyol Strategy: Enabling Scalable Processing and Enhanced Structural Performance},
journal = {ACS Applied Polymer Materials},
year = {2026},
volume = {8},
number = {17},
pages = {15227--15243},
doi = {10.1021/acsapm.6c02443}
}
EUVIMED