EUVIMEDEUVIMED entdecken
Crossref

Renewable Poly(α-methylene-γ-butyrolactone) Organogels Prepared by Postpolymerization Cross-Linking Reaction with Diamines

Mark Dizon, Martin Danko, Katarína Mosnáčková, Jozef Kollár, Miroslav Mrlík, Angela Kleinová, Jana Nováčiková, Tomáš Plachý, Joanna Pietrasik, Jaroslav Mosnáček

ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 13186-13201

DOI: 10.1021/acsapm.6c02254 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 25.07.2026. Verfasst von Mark Dizon und 9 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben. Gefördert von: Vedecká Grantová Agentúra MÅ VVaÅ SR a SAV, Ministerstvo Å¡kolstva, vedy, výskumu a Å¡portu Slovenskej republiky, European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sustainable polymers offer an environmentally friendly route to tunable soft functional materials. Here, a series of cross-linked gels derived from renewable α-methylene-γ-butyrolactone (MBL) were synthesized via thermally induced postpolymerization cross-linking. PMBL homopolymers were first prepared by free radical polymerization (FRP) or photo-ATRP to systematically vary molar mass and dispersity. Subsequent ring-opening amidation of pendant γ-butyrolactone units with diamine cross-linkers, namely, 1,6-hexanediamine (HexdiA) and 1,2-bis(2-aminoethoxy)ethane (BisEdiA), yielded covalently cross-linked networks. Structural characterization (1H NMR, ATR-FTIR, and TNBSA assays) confirmed efficient network formation, while rheological and swelling studies demonstrated highly tunable mechanical and thermoresponsive behavior. Cross-linking also raised the glass transition temperature up to ∼50 °C and improved thermal stability relative to the homopolymer. Control over precursor properties and cross-linker chemistry enabled precise adjustment of network density, mesh size (2–50 nm), and modulus (0.05–148 kPa). The gels exhibited nonmonotonic swelling characterized by transient overswelling and subsequent relaxation, while reaching equilibrium swelling values up to ∼8000% in DMSO and DMF. They displayed a temperature-dependent swelling–shrinkage–swelling pattern in DMF within the range −26 to 90 °C. Polymer–solvent interactions modeled by Flory–Huggins and network theories yielded ⟨χPMBL–DMSO⟩ = 0.435–0.460 and χgel = 0.51–0.53, with Mark–Houwink-Sakurada exponent a = 0.56. Hansen solubility parameters of the gels were found within dispersion values δD = 17–19 MPa0.5, polar values δP = 13–17 MPa0.5 and hydrogen bonding values δH = 8–12 MPa0.5. As a proof of concept, hydrophobic drug loading and release demonstrate the potential of PMBL as a renewable, tunable, and stimuli-responsive platform for soft organogels for controlled drug delivery.

Förderung

  • Vedecká Grantová Agentúra MÅ VVaÅ SR a SAV
  • Ministerstvo Å¡kolstva, vedy, výskumu a Å¡portu Slovenskej republiky
  • European Commission
  • Ministerstvo Å kolství, Mládeže a Telovýchovy
  • Narodowe Centrum Nauki
  • Agentúra na Podporu Výskumu a Vývoja
  • Sandberg Development AB, Sweden

Zitieren

APA

Dizon, M., Danko, M., Mosnáčková, K., Kollár, J., Mrlík, M., Kleinová, A., Nováčiková, J., Plachý, T., Pietrasik, J., & Mosnáček, J. (2026). Renewable Poly(α-methylene-γ-butyrolactone) Organogels Prepared by Postpolymerization Cross-Linking Reaction with Diamines. ACS Applied Polymer Materials, 8(15), 13186-13201. https://doi.org/10.1021/acsapm.6c02254

Vancouver

Dizon M, Danko M, Mosnáčková K, Kollár J, Mrlík M, Kleinová A, et al. Renewable Poly(α-methylene-γ-butyrolactone) Organogels Prepared by Postpolymerization Cross-Linking Reaction with Diamines. ACS Applied Polymer Materials. 2026;8(15):13186-13201. doi:10.1021/acsapm.6c02254

BibTeX
@article{Dizon2026,
  author = {Dizon, Mark and Danko, Martin and Mosnáčková, Katarína and Kollár, Jozef and Mrlík, Miroslav and Kleinová, Angela and Nováčiková, Jana and Plachý, Tomáš and Pietrasik, Joanna and Mosnáček, Jaroslav},
  title = {Renewable Poly(α-methylene-γ-butyrolactone) Organogels Prepared by Postpolymerization Cross-Linking Reaction with Diamines},
  journal = {ACS Applied Polymer Materials},
  year = {2026},
  volume = {8},
  number = {15},
  pages = {13186--13201},
  doi = {10.1021/acsapm.6c02254}
}
Kostenlos starten →