Vapor-Phase Deposition of Electroactive Polymers onto Electrospun Commodity Polyacrylonitrile Nanofibers
ACS Applied Polymer Materials · 14.08.2026 · 8 (15) · 12498-12508
DOI: 10.1021/acsapm.6c01623 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Polymer Materials, online erschienen am 31.07.2026. Verfasst von Shuvo Brahma und 3 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science, Engineering, and Commercialization Program, Texas State University, San Marcos, Texas 78666, United States. Die Arbeit nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Science Foundation (NSF).
Abstract (Originalsprache)
Electroactive polymers (EAPs) offer unique electrical and mechanical properties suitable for energy, environmental, and biomedical applications. Integrating EAPs with nanofibrous substrates can further enhance performance through the high surface area, interconnected porosity, mechanical flexibility, and tunable morphology of electrospun nanofibers. However, achieving uniform integration of EAPs on high-aspect-ratio nanofibers remains challenging due to poor coating homogeneity, limited penetration, and the reliance on toxic solvents in conventional deposition techniques. Here, a solvent-free vapor-phase deposition (VPD) process was developed to produce environmentally friendly and tunable EAP coatings on electrospun polyacrylonitrile (PAN) nanofibers. Electrospinning conditions were optimized to produce uniform PAN nanofibers with an average diameter of 350 nm. Poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole (PPy), poly(3-hexylthiophene) (P3HT), and poly(2,2′-bithiophene) (PBTH) were deposited via oxidative vapor-phase polymerization using iron(III) chloride (FeCl3) as the oxidant. Increasing FeCl3 concentration enhanced polymer deposition, resulting in increased nanofiber diameter and weight. Energy dispersive spectroscopy (EDS) confirmed increased sulfur-to-nitrogen ratios for PEDOT, PBTH, and P3HT coatings prepared with higher oxidant concentrations. Fourier transform infrared spectroscopy (FTIR) verified complete EAP coverage by the appearance of characteristic EAPs C═C and thiophene vibrations and the disappearance of PAN nitrile band. Four-point probe measurements showed that nanofiber conductivity was maximized at intermediate oxidant concentrations (2–3 M FeCl3), with the highest values of 0.41 S cm–1 for PPy-coated PAN nanofibers and 0.11 S cm–1 for PEDOT-coated nanofibers. Cyclic voltammetry (CV) demonstrated reversible redox behavior and quasi rectangular voltammograms for PEDOT-coated nanofibers at scan rates of 1–8 mV s–1, highlighting their potential as conductive platforms for charge storage and charge-transport applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Science, Engineering, and Commercialization Program, Texas State University, San Marcos, Texas 78666, United States.
- College of Science and Engineering, University of Houston-Clear Lake, Houston, Texas 77058, United States.
- Department of Chemistry and Biochemistry, Texas State University, San Marcos, Texas 78666, United States.
ORCID-Profile: Tania Betancourt
Förderung
- National Science Foundation (NSF)
Zitieren
APA
Brahma, S., Barrett, S. L., Irvin, J. A., & Betancourt, T. (2026). Vapor-Phase Deposition of Electroactive Polymers onto Electrospun Commodity Polyacrylonitrile Nanofibers. ACS Applied Polymer Materials, 8(15), 12498-12508. https://doi.org/10.1021/acsapm.6c01623
Vancouver
Brahma S, Barrett SL, Irvin JA, Betancourt T. Vapor-Phase Deposition of Electroactive Polymers onto Electrospun Commodity Polyacrylonitrile Nanofibers. ACS Applied Polymer Materials. 2026;8(15):12498-12508. doi:10.1021/acsapm.6c01623
BibTeX
@article{Brahma2026,
author = {Brahma, Shuvo and Barrett, Scott L and Irvin, Jennifer A and Betancourt, Tania},
title = {Vapor-Phase Deposition of Electroactive Polymers onto Electrospun Commodity Polyacrylonitrile Nanofibers},
journal = {ACS Applied Polymer Materials},
year = {2026},
volume = {8},
number = {15},
pages = {12498--12508},
doi = {10.1021/acsapm.6c01623}
}
EUVIMED